Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Mon, 14 Nov 2016 10:19 +0000

Hello everyone,
So i had a bit of time and decided to do a write up on my Lux. Got it on October and have already racked up 5000kms :D :D :D . Been a good vehicle so far with no issues.


Vehicle

2016 4X4 2.8L DSL D/C/C Manual GRAPHITE


Factory Accessories

- Toyota Warn Winch
- Steel Bull Bar - Premium
- Rear View Camera
- Tow Bar
- Floor Mats
- Snorkel


After Market Accessories

- 5x BF Goodrich TA K0-2 265/70R17 (OEM RIMS and yes tires fit but have slight rubbing when vehicle hard locks)
- Steel Tray (non-genuine tray colour coded)
* Jacking Points
* Trundle Draw
- ARB AR32 Intensity Spotlights (These fit perfectly with the factory premium steel bull bar)
- Superfit Seatcovers (Denim black which suits interior)
- LED worklamps for head board
- Window Tint (darkest legal)
- LED interior lights (map & center lights)
- LED drive lights
- 2x toolboxs mounted to steel tray
- ARB 140L frontier long range fuel tank (as in other posts pretty much when i fill the tank to the top, the tank stays full for 60L till i reach 80L then the range finally adjusts for remaining fuel. All ARB said they do is adjust the float switch)


Accessories on order

- Change park lights to LED
- Install air compress somewhere with dash switch control
- Brought a 12v remote control system to wire up my external lights (remotely turn work lights on/off)
- Addition lighting around vehicle (still doing some research)


Future Accessories

- Dual battery system
- ARB portable fridge (waiting to see what the 2017 march ARB fridge really looks like, might mount it on the tray with dash switch)
- A water tank (need to find a spot to mount tank)
- Have a remote search light mounted to roll bar (will make a bracket to offset one of my work lights and mount the remote search light)
- GME CB UHF XRS (just trying to figure out a place to mount it. I did like the idea from one of the other post to have a socket on the dash somewhere so the hand piece can be unplug when not in use)

Below are some photos of the vehicle so far...


Image

Image

Image

Image

Image

Image

Image
Last edited by TrentD on Sun, 01 Apr 2018 1:52 +0000, edited 2 times in total.
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha


 

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby Merkin on Tue, 15 Nov 2016 5:13 +0000

Looking good!
have you tried using the winch yet?
the oem battery is only 450CCA, i think warn reccommends minimum 650CCA for winch use...
cheers!
User avatar
Merkin
 
Posts: 188
Joined: Wed, 16 Mar 2011 5:12 +0000
Location: Orange NSW

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby abashii on Tue, 15 Nov 2016 5:16 +0000

Very nice, I love the look of that colour coded tray.
abashii
 
Posts: 21
Joined: Wed, 12 Oct 2016 4:04 +0000
Location: Vegas

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby snakesoup on Tue, 15 Nov 2016 7:18 +0000

looks very nice mate, how wide are the factory steelies?
snakesoup
 
Posts: 101
Joined: Wed, 04 Nov 2015 5:45 +0000
Location: Melbourne

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Wed, 16 Nov 2016 9:21 +0000

snakesoup wrote:looks very nice mate, how wide are the factory steelies?


7.5 inches
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Wed, 16 Nov 2016 9:23 +0000

Merkin wrote:Looking good!
have you tried using the winch yet?
the oem battery is only 450CCA, i think warn reccommends minimum 650CCA for winch use...
cheers!


Haven't used the winch yet but ill see how it goes when i use it to recover my jetski on the beach. Also ill take some pics
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby Tivvy on Sun, 27 Nov 2016 7:25 +0000

Hey mate does the graphite show scratches easily? love the graphite but worried it will show all the marks like a black ute would
Tivvy
 
Posts: 7
Joined: Sun, 20 Nov 2016 6:33 +0000
Location: Pakenham

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby nicovdw on Mon, 28 Nov 2016 4:31 +0000

Yes. It shows every scratch, ding, chip, swirl, etc. Had it 2 days when I thought I should have gone for white instead.
nicovdw
 
Posts: 112
Joined: Wed, 28 Oct 2015 4:55 +0000
Location: Green Point, NSW

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Tue, 29 Nov 2016 7:28 +0000

Tivvy wrote:Hey mate does the graphite show scratches easily? love the graphite but worried it will show all the marks like a black ute would


Yeah scratches come up easily, accidentally sideswiped a bush, but its only a surface scratch so ill buff it out once i get a few more and it starts looking like a bush basher.
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby Tivvy on Fri, 02 Dec 2016 7:44 +0000

Yeah sweet mate for the look of it I'll still go with the graphite, how are the bf's going I'm keen to get bigger on the straight away and that's the size I'm thinking but lots of people saying they rub.
Tivvy
 
Posts: 7
Joined: Sun, 20 Nov 2016 6:33 +0000
Location: Pakenham

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Mon, 05 Dec 2016 4:12 +0000

Tivvy wrote:Yeah sweet mate for the look of it I'll still go with the graphite, how are the bf's going I'm keen to get bigger on the straight away and that's the size I'm thinking but lots of people saying they rub.


I was in the same boat contemplating white vs graphite but ended up going with graphite so it didn't look like a work ute. Yeap they definitely rub when hard lock turning, but driving normally and 4wd with bumps tires are all good no rubbing.
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Thu, 19 Apr 2018 11:54 +0000

Image

Will do a update on build, currently installing ARB element fridge/freezer, addition rear lights, voltage monitor switch, finishing dual battery system, compressor mount behind back seat, XRS radio and additional USB's. More photos to come!
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Tue, 08 May 2018 6:41 +0000

UPDATE - Overview

Upfront: Installed ARB dual battery tray with red arc BCDC charger. Also have a CTEK charger for charging Hilux at home with ARB element fridge on.

Image

Cable runs: basically i have run a 8mm cable from the aux battery under the bonnet to behind the back seat. From there i have ran a 7 core trailer cable to the dash clusters for control wiring (eg switches for fridge, compressor and lights. Also another power cable run for the UHF radio to behind the dash.

Image

Image

Behind back seat: Locate behind the back seat is a fuse box (Narva 12 way fuse block), relays and a remote switch relay control panel. Also have installed a air compressor behind back seat (alot of room behind there!)

Image

Tray: Additional lighting and ARB element fridge/freezer installed

Image

Image
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Tue, 08 May 2018 6:52 +0000

Switches, USB, UHF, Voltage Monitor and remote

Image

Image

Image

Remote to turn lights on

Image
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Tue, 08 May 2018 7:09 +0000

Additional Stuff

Lighting

Image

Image

UHF Antenna

Image

Survival Kit (Satphone, EPIRB, handheld UHF radio and GPS) been going out to real remote areas lately!!!

Image
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby TrentD on Tue, 08 May 2018 7:32 +0000

Out Bush

Image

Image

Image

Image

Image

Image
TrentD
 
Posts: 18
Joined: Sat, 30 Apr 2016 1:03 +0000
Location: Karratha

Re: Trent's 2016 GRAPHITE SR DC Pilbara Build (Steel Tray)

Postby Terror on Sat, 23 Jun 2018 8:17 +0000

Coolest looking ute on NewHilux 8-)
User avatar
Terror
 
Posts: 60
Joined: Sun, 31 Jan 2016 8:48 +0000
Location: Sydney


Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 4 guests