The work/family SR DC - turbo, gears, suspension

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

The work/family SR DC - turbo, gears, suspension

Postby Thinpins on Mon, 29 Aug 2016 2:42 +0000

I've recently bought a 2016 SR Dual cab auto and it's almost here. My wife doesn't really appreciate it so I need to post it here to fish for positive reinforcement. Should be ready Wednesday this week. Pics to come


I paid it a little visit the other day to Fourby's while it was there getting dressed up to get a sneak peak pre delivery.

"UPDATED"


Unichip Q4 with HV driver
New MW alloy canopy with full length rack
Lovells 2" lift with 3500kgGVM upgrade pre registration
Ironman deluxe commercial bar w/ scrub bars and side steps and recovery points
Ironman 9500kg winch
Swapping from current ute, 2013 SR5 wheels with Mickey STZ 265/70/17
Tint
Toyota tow bar
Toyota canvas front and rear seats
Reverse camera
Bris Utes Alloy tray 1900x1900 (these trays are unreal, very solid)
Dual battery tray
Enerdrive VSR
105AH DEEP CYCLE


Still to fit
GME 3500 UHF
Hertz splits and Hertz 5 channel amp

Will probably fit some PHAT underbody stuff, had it on the last one and they were solid

Sure I've missed stuff but it'll come to me.

Any suggestions would be good.
Last edited by Thinpins on Mon, 02 Jul 2018 2:50 +0000, edited 8 times in total.
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000


 

Re: The long wait for my ultimate work/family SR DC

Postby Ozwaz on Tue, 30 Aug 2016 5:16 +0000

My wife was the same until she drove it...now I can't get her out of the bloody thing. I built her a dog cage for the back to keep her shopping safe :D
Ozwaz
 
Posts: 115
Joined: Mon, 27 Jun 2016 8:17 +0000
Location: Rossville FNQ

Re: The long wait for my ultimate work/family SR DC

Postby Thinpins on Tue, 30 Aug 2016 6:43 +0000

Along those lines, you could put a 2" lift to give her better visibility in traffic. ;)
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: The long wait for my ultimate work/family SR DC

Postby Ozwaz on Tue, 30 Aug 2016 6:48 +0000

You could even tell her her arse looks awesome in the reversing camera when she closes the gate ;)
Ozwaz
 
Posts: 115
Joined: Mon, 27 Jun 2016 8:17 +0000
Location: Rossville FNQ

Re: The long wait for my ultimate work/family SR DC

Postby Jamie J on Wed, 31 Aug 2016 7:05 +0000

Let's hope it wins her over when it's all together. Sounds like a nice list of mods
Jamie J
 
Posts: 68
Joined: Mon, 14 Dec 2015 8:40 +0000
Location: Emerald QLD

Re: The long wait for my ultimate work/family SR DC

Postby Thinpins on Wed, 31 Aug 2016 7:31 +0000

1st attempt at image posting. Picked it up today

Image
Last edited by Thinpins on Thu, 29 Sep 2016 9:47 +0000, edited 1 time in total.
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: The long wait for my ultimate work/family SR DC

Postby Thinpins on Wed, 31 Aug 2016 7:34 +0000

Image
Last edited by Thinpins on Thu, 29 Sep 2016 9:48 +0000, edited 1 time in total.
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: The long wait for my ultimate work/family SR DC

Postby dannyboy1 on Wed, 31 Aug 2016 7:53 +0000

Looks good mate

How much gap between scrub bars and the snorkel ?
dannyboy1
 
Posts: 32
Joined: Mon, 28 Feb 2011 5:56 +0000

Re: The long wait for my ultimate work/family SR DC

Postby I8ian4t on Thu, 01 Sep 2016 6:44 +0000

Looking good :) Similar too mine (white sr trayback dualcab with ironman bars)

Got any pictures of the reversing camera, How its mounted? Can you see the corners of the tray?

I'm booking mine in at its 1000k service for one. Not sure where too mount it yet. Guessing ill need to fabricate a mount?
I8ian4t
 
Posts: 5
Joined: Thu, 28 Jun 2012 6:18 +0000

Re: The long wait for my ultimate work/family SR DC

Postby mcflux on Thu, 01 Sep 2016 7:35 +0000

Ozwaz wrote:You could even tell her her arse looks awesome in the reversing camera when she closes the gate ;)


"Why do the reverse lights come on every time I shut the gate?"

"Why did you engineer the gate latch to be at ground level?"
2016 SR HiRider - <Thread>
Factory Options: Premium bullbar, tub liner, tow pack
Additions: IPF900 spotlights + 20" LED bar, tint, TJM canopy
User avatar
mcflux
 
Posts: 70
Joined: Mon, 21 Mar 2016 11:03 +0000
Location: Gippsland, Victoria

Re: The long wait for my ultimate work/family SR DC

Postby Thinpins on Thu, 01 Sep 2016 8:21 +0000

Not a lot. 10mm

Front tyres are rubbing on the mud flaps too at some points when I turn. I would have thought 265/70/17 with a 2" lift would have been no problem
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: The long wait for my ultimate work/family SR DC

Postby Drabz86 on Thu, 01 Sep 2016 12:08 +0000

Thinpins wrote:Not a lot. 10mm

Front tyres are rubbing on the mud flaps too at some points when I turn. I would have thought 265/70/17 with a 2" lift would have been no problem



most likely the wheel aliment - need to pull the front forward a little bit.

and pin back the mud guards.
User avatar
Drabz86
 
Posts: 34
Joined: Wed, 21 Aug 2013 10:45 +0000

Re: The long wait for my ultimate work/family SR DC

Postby Thinpins on Thu, 01 Sep 2016 5:48 +0000

I8ian4t wrote:Looking good :) Similar too mine (white sr trayback dualcab with ironman bars)

Got any pictures of the reversing camera, How its mounted? Can you see the corners of the tray?

I'm booking mine in at its 1000k service for one. Not sure where too mount it yet. Guessing ill need to fabricate a mount?

This is where toyota mounted it. It has a small bracket. I will probably move it further under the tray to catch the lowball and a little of the tray. My old one was about 200mm under and I think it was a slightly better set up.

The reverse view is of my 8x5 trailer hooked up to give you an idea of angle. I put two orange safety bollards in line with the corners of the tray and they were 200mm back from the tray by the time I could see them in the camera, Where the camera is now is good for overall viewing angle but is a little hard to judge distance when things get really close. As with all things, I will get used to it.

Image
Image
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: Here! work/family SR DC

Postby Viper82 on Thu, 01 Sep 2016 8:19 +0000

The toyota tray has a different setup to that camera install. My camera shows the lines on the screen for for distance till you hit something also. I got a pick up dual cab and put a tray onto it as it comes with a reverse camera where as the cab chassis its an extra
Viper82
 
Posts: 375
Joined: Tue, 25 Aug 2009 4:38 +0000
Location: Adelaide S.A

Re: Here! work/family SR DC

Postby mcflux on Fri, 02 Sep 2016 6:42 +0000

This is how the standard camera on a tub gate appears on the screen, although I can see why it wouldn't really suit an offset custom-mounted camera:

Image

If you were able to remount centrally then perhaps swapping the camera/software for the factory tub appearance might help with lining up the trailer? Not sure if this post helps or if I'm full of it...
2016 SR HiRider - <Thread>
Factory Options: Premium bullbar, tub liner, tow pack
Additions: IPF900 spotlights + 20" LED bar, tint, TJM canopy
User avatar
mcflux
 
Posts: 70
Joined: Mon, 21 Mar 2016 11:03 +0000
Location: Gippsland, Victoria

Re: Here! work/family SR DC

Postby Thinpins on Sun, 04 Sep 2016 6:41 +0000

I would prefer to have the lines so will have to check with the dealer. It was installed by toyota so I would have thought it would be the same. I've seen some of the eBay cameras have two circuits which can be clipped. Once clipped the lines appear or the image is flipped.
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: Here! work/family SR DC

Postby Rodenocana on Thu, 08 Sep 2016 1:53 +0000

Hi mate how many percent is your tint?
Rodenocana
 
Posts: 2
Joined: Tue, 26 Jul 2016 9:09 +0000
Location: South australia

Re: Here! work/family SR DC

Postby Mutto on Thu, 08 Sep 2016 2:01 +0000

Thinpins wrote:I would prefer to have the lines so will have to check with the dealer. It was installed by toyota so I would have thought it would be the same. I've seen some of the eBay cameras have two circuits which can be clipped. Once clipped the lines appear or the image is flipped.


I have the Toyota reversing camera installed on my cab chassis sr and the camera picture is he same as yours. Be interested to see if there is a hidden option to add the lines though.

Mutto
Mutto
 
Posts: 60
Joined: Sat, 10 Oct 2015 8:31 +0000
Location: Tom Price

Re: Here! work/family SR DC

Postby Thinpins on Thu, 08 Sep 2016 3:43 +0000

Rodenocana wrote:Hi mate how many percent is your tint?

I'm not sure, it's pretty low compared to previous ones. Toyota did it pre delivery so probably just dark as legal.
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Re: Here! work/family SR DC

Postby Thinpins on Thu, 08 Sep 2016 3:45 +0000

Mutto wrote:
Thinpins wrote:I would prefer to have the lines so will have to check with the dealer. It was installed by toyota so I would have thought it would be the same. I've seen some of the eBay cameras have two circuits which can be clipped. Once clipped the lines appear or the image is flipped.


I have the Toyota reversing camera installed on my cab chassis sr and the camera picture is he same as yours. Be interested to see if there is a hidden option to add the lines though.

Mutto


When I asked the dealer he said all the cab chassis cameras don't have lines because of different trays etc. I'm with you and hoping there's a line option somewhere
Thinpins
 
Posts: 64
Joined: Thu, 20 Jun 2013 7:32 +0000

Next

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 2 guests