Page 1 of 1

Where to mount Scangauge-2?

PostPosted: Wed, 21 Oct 2020 8:10 +0000
by Markdavo
I made the plunge and now am looking for recommendations of where to mount it in my 2016 SR?

Thanks in advance,

Mark

Re: Where to mount Scangauge-2?

PostPosted: Wed, 21 Oct 2020 10:22 +0000
by Bushwalker8
I have mine sitting across the top of the head unit, adhesive Velcro on both surfaces.
The trim behind pops out easily, filed a small round hole in it's edge for the cable to disappear into the dash.

Re: Where to mount Scangauge-2?

PostPosted: Wed, 21 Oct 2020 10:44 +0000
by Allords
I have this stuck to the bottom right of the windscreen. Simply run the cable up the side of the dash, tucking it into the rubber weather seal....Perfect!

https://www.scangauge.com.au/window-mount

Re: Where to mount Scangauge-2?

PostPosted: Thu, 22 Oct 2020 6:19 +0000
by Silverfox1111
I've got mine velcroed to the top of the steering column between the indicator & wiper stalks.
Silverfox

Re: Where to mount Scangauge-2?

PostPosted: Thu, 22 Oct 2020 5:01 +0000
by Markdavo
Allords wrote:I have this stuck to the bottom right of the windscreen. Simply run the cable up the side of the dash, tucking it into the rubber weather seal....Perfect!

https://www.scangauge.com.au/window-mount


I found a Garmin mount in a cupboard, similar the Scangauge mount, and installed as you did above. Thanks Allords, Mark

Re: Where to mount Scangauge-2?

PostPosted: Sun, 25 Oct 2020 9:23 +0000
by flyingdoctor
Mine is here.
In the upper middle , the picture was to show the radio not the scangauge ;)

Image

Re: Where to mount Scangauge-2?

PostPosted: Sun, 25 Oct 2020 9:31 +0000
by Markdavo
Markdavo wrote:
Allords wrote:I have this stuck to the bottom right of the windscreen. Simply run the cable up the side of the dash, tucking it into the rubber weather seal....Perfect!

https://www.scangauge.com.au/window-mount


I found a Garmin mount in a cupboard, similar the Scangauge mount, and installed as you did above. Thanks Allords, Mark


Alas the Garmin mount came unstuck from the dash so I simply used some heavy duty Velcro to stick it onto the dash mat. Simple.

Cheers, Mark