Rear seat

General discussion of basically anything related to the 2015> Hilux

Rear seat

Postby KUN26R on Sat, 25 Feb 2017 2:01 +0000

Howdy all, can anyone tell me how the back seat comes out in a sr dual cab 2016? I've taken the 5 bolts out at the base but it feels as though the top of the back rest is still fixed? Any help would be great.[emoji106]


Sent from my iPhone using Tapatalk
User avatar
KUN26R
 
Posts: 46
Joined: Wed, 15 Dec 2010 9:37 +0000


 

Re: Rear seat

Postby Spitfia on Sat, 25 Feb 2017 2:25 +0000

If its anything like the gen 7 then there are will be 2 hooks on the back rest just lift up and should detach
YOU LOOKIN AT MY EYE?!!!
MY10 2011 SR Hilux DC, Steinbauer Module, 2" lift, BFG AT 265/75R16 etc. etc. etc.
User avatar
Spitfia
 
Posts: 262
Joined: Sat, 28 May 2016 1:46 +0000
Location: Perth, WA

Re: Rear seat

Postby KUN26R on Sat, 25 Feb 2017 2:31 +0000

No, there is a different set up fixing the seats in. I've seen a few people post on here that they have gotten access behind there but I can't get them right out.


Sent from my iPhone using Tapatalk
User avatar
KUN26R
 
Posts: 46
Joined: Wed, 15 Dec 2010 9:37 +0000

Re: Rear seat

Postby KUN26R on Sat, 25 Feb 2017 3:00 +0000

I did get it out, just needed to lift the seat straight up once unbolted.
I think I saw that someone else posted a pic of behind the seat but I couldn't see how it unattached.
My compressor fits in perfectly but I'm a bit worried it might get a bit hot in there?
Gonna try to fix the moulding away from the compressor head somehow.
ImageImageImageImageImage


Sent from my iPhone using Tapatalk
User avatar
KUN26R
 
Posts: 46
Joined: Wed, 15 Dec 2010 9:37 +0000

Re: Rear seat

Postby berniecam on Sun, 26 Feb 2017 1:29 +0000

Just a little hint if anyone has not realised it also that centre seat belt can easily be detached from the floor mount there is a small lock in clip that can be unlatched just look down where it bolts to the floor there is a lock in clip that has a red line on it use a screw driver blade to push the on that spot it will then unlock it from between the two seat halves if you want to remove the seat assembly from the vehicle. I also mounted my ARB compressor in that space not had any problems wit it over heating. Cheers.
User avatar
berniecam
 
Posts: 372
Joined: Sat, 29 Mar 2008 1:00 +0000
Location: , NSW

Re: Rear seat

Postby KUN26R on Mon, 27 Feb 2017 8:43 +0000

Did you wire your compressor in or do you have a lead on it and hook it up when needed?
I've just put an anderson plug on mine, I'll plug it into an anderson plug on the front of my tray. I'd like to hard wire it at some stage though.


Sent from my iPhone using Tapatalk
User avatar
KUN26R
 
Posts: 46
Joined: Wed, 15 Dec 2010 9:37 +0000

Re: Rear seat

Postby berniecam on Wed, 01 Mar 2017 5:26 +0000

KUN26R wrote:Did you wire your compressor in or do you have a lead on it and hook it up when needed?
I've just put an anderson plug on mine, I'll plug it into an anderson plug on the front of my tray. I'd like to hard wire it at some stage though.


Sent from my iPhone using Tapatalk

Hi KUN26R Not wired in Just use a lead on it with a merit plug on it,( be sure to use merit plugs that have a full set of contacts all the way round for the earth pins I use the Hella ones. Cheaper merit plugs only have one earth contact on the plug & may not be able to carry enough amps.) I have two merit sockets fitted into the lift up flap in my ARB rear bar one has a 15 amp supply the other has a 50 amp supply compressor only draws about 20 amps max so no problems, both supplied by my aux battery, have another merit socket under the bonnet with 30 amp supply from start battery lead from compressor can reach either front or rear. Also fitted a short length of air hose to compressor with a bayonet fitting so all I have to do is plug in the inflator hose that I keep behind the back seat to this & away you go. CHEERS :)
User avatar
berniecam
 
Posts: 372
Joined: Sat, 29 Mar 2008 1:00 +0000
Location: , NSW

Re: Rear seat

Postby tony43 on Thu, 19 Mar 2020 2:04 +0000

vorrei sapere se qualcuno e' riuscito ad utilizzare lo spazio dietro ai sedili aprendo e chiudendo lo schienale, Tony
tony43
 
Posts: 2
Joined: Thu, 19 Mar 2020 1:44 +0000
Location: modena, italy

Re: Rear seat

Postby Mrwhite on Mon, 23 Mar 2020 5:50 +0000

tony43 wrote:vorrei sapere se qualcuno e' riuscito ad utilizzare lo spazio dietro ai sedili aprendo e chiudendo lo schienale, Tony


Non è possibile su Hilux Gen8. Toyota ha cambiato il design della parte posteriore del sedile in modo che si allenti solo con bulloni.
Mrwhite
 
Posts: 2
Joined: Sun, 02 Feb 2020 2:10 +0000
Location: Adelaide

Re: Rear seat

Postby tony43 on Fri, 27 Mar 2020 1:51 +0000

ho tolto i 5 bulloni e poi ho sganciato lo schienale, ho riavvitato i bulloni senza agganciare lo schienale con i due ganci, lo scienale ora si può aprire ma non so come fissarlo
tony43
 
Posts: 2
Joined: Thu, 19 Mar 2020 1:44 +0000
Location: modena, italy


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 6 guests