4WDSUPACENTRE

General discussion of basically anything related to the 2015> Hilux

Re: 4WDSUPACENTRE

Postby Not Sure on Thu, 20 Oct 2016 7:43 +0000

I don't know about that, most just ship a product to 3 or 4 manufacturers and go with the best bang for buck. We now won't fit Arb or Tjm bullbars as there quality and fitting is below par. A new side rail for a Gu patrol is about half the weight of 1 from a few years ago.
Not Sure
 
Posts: 4
Joined: Fri, 24 Jul 2015 5:22 +0000
Location: Australia


 

Re: 4WDSUPACENTRE

Postby incman on Thu, 20 Oct 2016 11:03 +0000

Bullbars must be made here, the pimp that on their site? I am about to go for a Sahara bar, so Ill ask them

ARB Bull Bar Manufacturing
Follow an ARB bull bar through the entire manufacturing process. From a flat sheet of steel, experience every stage of our state-of-the-art factory in Melbourne, Australia, and take a unique look at the effort, passion and attention to detail required to build the world’s best 4×4 protection equipment.

Shot entirely on a GoPro, this video provides the ultimate in behind the scenes action.
http://www.arb.com.au/products/protecti ... rotection/
incman
 
Posts: 222
Joined: Sun, 16 Nov 2014 4:01 +0000
Location: Canberra

Re: 4WDSUPACENTRE

Postby Not Sure on Thu, 20 Oct 2016 12:36 +0000

Well thats very interesting, I'm certainly not opposed to being corrected, for us it was one problem after another in supply and quality. Even the bolts that come with certain bars are garbage, the spring washers split and break up. We were fitting about 7 or 8 a month at one stage, but now just subby them out.
Not Sure
 
Posts: 4
Joined: Fri, 24 Jul 2015 5:22 +0000
Location: Australia

Re: 4WDSUPACENTRE

Postby incman on Thu, 20 Oct 2016 1:10 +0000

Thanks for that, $2432.00 for a Sahara bar, so wouldnt be happy if they ship/install with poor quality fixtures.

Would be risky for ARB to do that I would have thought, as they have ADR certification for these bars, so sub standard fixtures would negate that I would have thought

Mounting System
The mounting system is a vital part of any ARB bull bar design. ARB\'s mounting systems are specifically engineered to spread impact and winching loads evenly over the vehicle\'s chassis. This ensures the bull bar functions properly in extreme conditions.
http://www.arb.com.au/products/protecti ... ahara-bar/
incman
 
Posts: 222
Joined: Sun, 16 Nov 2014 4:01 +0000
Location: Canberra

Re: 4WDSUPACENTRE

Postby creaky on Thu, 20 Oct 2016 2:15 +0000

I've never heard much complaint in relation to the quality of ARB bars. They have been caught in the past with underdevelopment of new product in the rush to be first on the market with some fitment issues (e.g. bar to body gaps).

I think it's pretty safe to say that, in general, ARB bars will be top notch and with as good or better quality fittings than many of the other options on the market. That being said, they do charge for it (plus their marketing up-sell) and they aren't always the best looking bars, but that is subjective.
creaky
 
Posts: 334
Joined: Sun, 26 Jun 2016 12:41 +0000
Location: Brisbane, Queensland

Re: 4WDSUPACENTRE

Postby Jamair on Thu, 20 Oct 2016 11:44 +0000

I got down to Brisvagas couple weeks ago & went to the 4WD Supercentre at Brendale. It a no frills warehouse basically, but they had on display all the stuff from their website. I found it to be pretty reasonable quality and value for the asking prices, although the proof of the pudding is in the eating, so the quality and durability will need to be assessed in the field.

I didn't buy anything as I had no room in the luggage on the plane, but I will be ordering some spotties and other stuff next time I see the free freight offer.
User avatar
Jamair
 
Posts: 10
Joined: Fri, 03 Jun 2016 10:38 +0000
Location: Mount Isa Qld

Re: 4WDSUPACENTRE

Postby ducky_29 on Tue, 22 Nov 2016 8:21 +0000

Hobosgold wrote:I bought the draws, not bad for about $500 delivered to my door, only problem was the fridge slide catch does not stay locked :cry:


As in it's faulty or that's just the way its design?

I'm considering buying these drawers so any feedback would be great.
ducky_29
 
Posts: 10
Joined: Fri, 28 Mar 2014 6:48 +0000

Re: 4WDSUPACENTRE

Postby ktm300 on Tue, 22 Nov 2016 9:11 +0000

ducky_29 wrote:
Hobosgold wrote:I bought the draws, not bad for about $500 delivered to my door, only problem was the fridge slide catch does not stay locked :cry:


As in it's faulty or that's just the way its design?

I'm considering buying these drawers so any feedback would be great.



I just odered the drawers today pick up Saturday , The postage was $120 so I said no thanks I will pick up .
The drawers were only $359 , So how bad can they be.
User avatar
ktm300
 
Posts: 799
Joined: Tue, 18 Jan 2011 4:28 +0000
Location: Yarrawonga Victoria

Re: 4WDSUPACENTRE

Postby sharp018 on Tue, 22 Nov 2016 9:17 +0000

I found the drawers to be quite good. i to have the fridge catch problem which i just unbloted it and moved it closer to the catch worked a treat, i broke a handle off

But ended up selling it due to selling the canopy, Still better then arb and stuff

Oh yeah if you do much 4x4ing the bearings in the draw slides buckle pain in the ass to get the draw out if it happens to you
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: 4WDSUPACENTRE

Postby ktm300 on Tue, 22 Nov 2016 9:22 +0000

sharp018 wrote:I found the drawers to be quite good. i to have the fridge catch problem which i just unbloted it and moved it closer to the catch worked a treat, i broke a handle off

But ended up selling it due to selling the canopy, Still better then arb and stuff

Oh yeah if you do much 4x4ing the bearings in the draw slides buckle pain in the ass to get the draw out if it happens to you



Sounds Great . If they fall apart Ill throw them on the rubbish pile .

Because they are going to get used reasonably hard in my 4wd
User avatar
ktm300
 
Posts: 799
Joined: Tue, 18 Jan 2011 4:28 +0000
Location: Yarrawonga Victoria

Re: 4WDSUPACENTRE

Postby sharp018 on Tue, 22 Nov 2016 9:33 +0000

i loved mine dont get me wrong, these things happen even if you were to buy well known brand ive seen bad comments on black widows. Only thing with 4wd supa center no 2 things are same haha, you'll either get the typical aussie half ass job, or someone was having a good day :P
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: 4WDSUPACENTRE

Postby sharp018 on Tue, 22 Nov 2016 9:35 +0000

mind you i paid 800 for mine when they came out spewin still to this day haha, could of scored a dominator winch but the price of those nower days its a steal anyway!

I ordered the roof top tent with anex and 2 sets of the led 7 inch round lights for just over $1000
i was very happy with that, And having the store only an hours drive away its just as cheap to pick it up :)
sharp018
 
Posts: 421
Joined: Sun, 23 Mar 2014 4:13 +0000

Re: 4WDSUPACENTRE

Postby GC_Hilux on Wed, 29 May 2019 8:08 +0000

Sorry to bump an old thread but does anyone run their driving lights?

Cheap, but are they nasty?

I was looking at some 7 or 9 inch Korr or Stedi spot/spread combos.

I noticed 4x4 Supacentre have new gen driving lights.

Who’s running them?
GC_Hilux
 
Posts: 48
Joined: Fri, 04 Nov 2016 12:12 +0000
Location: Kingscliff

Re: 4WDSUPACENTRE

Postby TOYZX on Wed, 29 May 2019 8:40 +0000

I dunno about the new gen ones but I've had a set of 9in on for about a year and can't fault them. As I told my boss(the owner if an arb store) I could buy a new set of them every year for over ten years and still have change for a set if arb intensities! Hard to beat, bang for the buck!

Sent from my SM-G955F using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: 4WDSUPACENTRE

Postby NZMarkb on Thu, 30 May 2019 1:51 +0000

I've been running a 9" set for 3 years and can't fault them
As TOYZX says great bang for your buck and you aren't paying for the brand name
If your not prepared to stand behind our Troops
Then try standing in front of them
User avatar
NZMarkb
Platinum Subscriber
 
Posts: 702
Joined: Thu, 18 Jul 2013 3:48 +0000
Location: Auckland NZ

Re: 4WDSUPACENTRE

Postby GC_Hilux on Thu, 30 May 2019 5:48 +0000

That’s good feedback! Cheers


Sent from my iPhone using Tapatalk
GC_Hilux
 
Posts: 48
Joined: Fri, 04 Nov 2016 12:12 +0000
Location: Kingscliff

Re: 4WDSUPACENTRE

Postby Craigmaher on Sun, 16 Jun 2019 5:14 +0000

Cannot fault the 4WD supacentre lights - cheap and bang for buck - if they don't work / get stolen I've done $200 - not $1000+..
Craigmaher
 
Posts: 3
Joined: Tue, 04 Apr 2017 6:47 +0000
Location: Valentine, NSW

Re: 4WDSUPACENTRE

Postby Dazza32 on Sun, 16 Jun 2019 7:08 +0000

Agree with fridge slide catch on drawers. Ordered another from them for $10. Works heaps better.
Dazza32
 
Posts: 33
Joined: Wed, 22 Mar 2017 6:21 +0000
Location: Darwin

Re: 4WDSUPACENTRE

Postby jabiru18 on Mon, 29 Jul 2019 4:10 +0000

Purchased a big daddy swag and used it last weekend it worked great. We only go camping a few times a year so I figure if it lasts a few years I’m well in. The quality seems really good.

Rolling the beast up was a different story. It uses so much space as it’s huge, and I had to use occy straps to hold it as the straps were 12” short.

I googled rolling it up and none of the vids actually show rolling up with the foam mattress inside, they are flat as tacks when they demo.With the 70mm mattress, sleeping bag and blanket it was so hard to compress, needed me missus to help :oops:

I’m gonna take the mattress out and use a blow up instead. That’ll reduce it 65mm.

Any tips?
jabiru18
 
Posts: 145
Joined: Wed, 23 Aug 2017 12:37 +0000

Re: 4WDSUPACENTRE

Postby Rogue on Tue, 30 Jul 2019 2:02 +0000

jabiru18 wrote:Purchased a big daddy swag and used it last weekend it worked great. We only go camping a few times a year so I figure if it lasts a few years I’m well in. The quality seems really good.

Rolling the beast up was a different story. It uses so much space as it’s huge, and I had to use occy straps to hold it as the straps were 12” short.

I googled rolling it up and none of the vids actually show rolling up with the foam mattress inside, they are flat as tacks when they demo.With the 70mm mattress, sleeping bag and blanket it was so hard to compress, needed me missus to help :oops:

I’m gonna take the mattress out and use a blow up instead. That’ll reduce it 65mm.

Any tips?

Get a self inflating mattress in there instead, they compress a lot when they're rolled up, plus shit over anything else out there, air beds are probably the worst. They can get a bit exxy, Snowys have a good one at a good price, check out the monstamats from zempire, reviews seem good.
Rogue
 
Posts: 15
Joined: Mon, 22 Apr 2019 5:53 +0000
Location: Canberra

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 5 guests