Driving lights for 2016 Premium Steel Bullbar

[Stink989]

Thanks for posting those pics of the AR32s nice and snug fit hey? But at least they fit!!
Has anyone tried those 4wd supercentre led spotties as well? Thinking they prob wouldn't have all that good throw on them, but interested to hear if anyone has tried them out?

I have a set on my ironman bar. They work great! Might be a bit too big for the genuine bar though.

[telliscope]

Thinking the AR21 lights would fit a bit better, and save some $$$ at the same time

[TOYZX]

Also, a tip for you lads fitting lights to these bars. If you remove the top grill cover you can reach down to the center of the bar. You can then use a clip tool or side cutters to pull up the Christmas tree clips that hold the mesh insert in and remove the mesh. You can then get access to the inside of the top plate to put the bolts in for your lights. Hope that helps! Cheers Luke.

Sent from my SM-N920I using Tapatalk

[telliscope]

Anyone with the AR21 on the Toyota bar? TOYZX did you use the original in the bar for the centre of the bracket and drill the other two side holes?

[TOYZX]

From memory there aren't any holes in the bar, just sat the base plate on so the front edge was about level with the front edge of the bar and marked the holes.

Sent from my SM-N920I using Tapatalk

[bevron05]

I fitted the Lightforce DL230 HTX LED on the Toyota Premium Bar,I was able to use the standard hole in the bar without any modifications.

[ryturn]

Hi Bevron any chance of a photo of the dual switch setup in the cab you chose for the L/Force HTX

[bevron05]

Hi Bevron any chance of a photo of the dual switch setup in the cab you chose for the L/Force HTX

[ryturn]

thanks for that bevron ,l have the HTX and love them but thats not the switch arrangement l got .l have 1 switch only not L/Force branded and no option of LED,HID separate just both on.I was told they did it that way to avoid cutting holes !!.Is the switch to the left of the idle up L/Force as well or other?

[bevron05]

No Ryturn it is the standard idle up switch that came with my SR

[creaky]

The one to the left of idle up is the headlight angle adjuster.

Nice OEM style switches from Lightforce but they should have distinguished the LED switch from the SPOT switch really.