NewHilux.net

by **The Shafter** on Mon, 04 Jul 2016 5:28 +0000

Snorkel last week, BFG KO 2s - 285/60/18 arrived early, now sitting on some Satin black King Daytonas. OME lift going in on Wednesday and still waiting for ARB Ascent canopy and colour coded front bar to arrive. Then the new Lightforce HTX 230's can go on.

by **Richard** on Mon, 04 Jul 2016 11:39 +0000

Mutto wrote:
Richard wrote:
TOYZX wrote:They are a great bit of kit if ya can afford them!

Sent from my SM-N920I using Tapatalk

Took them for an over night spin to Cape Bedford via Cape Trib' then out to Laura on the Battle Camp track. Back into Cooktown and the coast road again into Cairns.

Total of just over 900K.

I'd love to do a write up on them but I wouldn't have a clue where to start.

WOOT!

Should be getting mine installed early next week!

Don't be worried about pushing them Mutto as that's where they really shine.

And watch no one knocks off the BP-51 stickers that come with the hand book..

by **sugaris** on Wed, 06 Jul 2016 11:56 +0000

Just received a call from the lads out the back... have a look at whats arrived.

Can't get it fitted until next week... :cry:

Can't wait!

by **Richard** on Wed, 06 Jul 2016 1:25 +0000

Looks good mate.

by **sugaris** on Wed, 06 Jul 2016 1:28 +0000

truarn_75 did you receive my pm reply?

by **Mutto** on Wed, 06 Jul 2016 8:10 +0000

They're a good looking bar!

by **nickoslux** on Thu, 07 Jul 2016 7:28 +0000

Does anyone know why most of the bullbars on the new model require the bumper to be cut.? Even the toyota ones are cut. It looks like an add on whereas the old model ARBs and others were a total bumper replacement.

by **TOYZX** on Thu, 07 Jul 2016 8:10 +0000

Because of the wide guards and no flares it tucks in nicely inside the line of the body. Pretty much the only 4x4 that doesn't require the bumper to be cut now days are the landcruiser utes. Its just the way it is I'm afraid. Allows the bar to sit lower also, more in line with the chassis for more direct impact and if a winch is fitted you want it sitting in line too.

Sent from my SM-N920I using Tapatalk

by **tuff-lux** on Thu, 07 Jul 2016 8:12 +0000

The ironman bull bars don't require a bumper cut on the n80.

Sent from my iPhone using Tapatalk

by **TOYZX** on Thu, 07 Jul 2016 8:54 +0000

I must admit the ironman bar looks nice up and high. It does however make the winch very high giving it alot on leverage on the chassis. Ironman would want to have made some massive improvements on their mounts before I'd pull on it with a winch. Perfectly fine if you never intend to fit a winch tho![WINKING FACE]

Sent from my SM-N920I using Tapatalk

by **RAZ67** on Fri, 08 Jul 2016 2:19 +0000

I reckon the Ironman bar looks the pick of the bunch, it follows the lines of the car well and as stated is a full bumper replacement also it doesn't sit to far forward which is nice, as we know these new Hiluxes have a very deep nose, I have one going on in a couple of weeks. Years ago I would of frowned at a Ironman bar, but they have definitely improved a lot.

by **TOYZX** on Fri, 08 Jul 2016 2:30 +0000

Yes they are getting better at copying things![FACE WITH TEARS OF JOY]

Sent from my SM-N920I using Tapatalk

by **Richard** on Fri, 08 Jul 2016 4:07 +0000

I reckon the Rhino bars, for looks, is the pick of the bunch.

Pity their service is so shit house, coming up close to three months I've been waiting.

by **Jacko9** on Fri, 08 Jul 2016 4:48 +0000

Ironman might look pretty good, but they are utter shit in build quality IMO. I've said it before, don't come close to arb for quality.

by **nedkelly21** on Sat, 09 Jul 2016 6:23 +0000

RAZ67 wrote:I reckon the Ironman bar looks the pick of the bunch, it follows the lines of the car well and as stated is a full bumper replacement also it doesn't sit to far forward which is nice, as we know these new Hiluxes have a very deep nose, I have one going on in a couple of weeks. Years ago I would of frowned at a Ironman bar, but they have definitely improved a lot.

Been looking into this bar for the same reasons, would be keen to see some pics once installed and get your take on the build quality.

by **mcflux** on Thu, 14 Jul 2016 4:29 +0000

Latest addition! I think my lighting is complete now: 2x IPFs + 20" LED bar up front, & this 6" LED tub light 8-)

by **Mutto** on Thu, 14 Jul 2016 7:04 +0000

BP51s installed! Looking forward to giving them a work out this weekend!

by **hillbillie92** on Fri, 15 Jul 2016 7:03 +0000

Few mods since ive had it
Window tint

Provent 200 catch can

Led reverse globes

Led interior lights

by **zypher** on Sat, 16 Jul 2016 6:08 +0000

hillbillie92 wrote:Few mods since ive had it
Window tint

Provent 200 catch can

Led reverse globes

Led interior lights

What are the bulb sizes for the back up light and interior bulbs? I'm planning on doing this aswell...

Thank you...

by **zypher** on Sat, 16 Jul 2016 6:11 +0000

The Shafter wrote:Snorkel last week, BFG KO 2s - 285/60/18 arrived early, now sitting on some Satin black King Daytonas. OME lift going in on Wednesday and still waiting for ARB Ascent canopy and colour coded front bar to arrive. Then the new Lightforce HTX 230's can go on.

hows the clearance on the 285? No rubbing when in full turn?

NewHilux.net

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?

Re: What did you do to your Hilux Gen 8?