Factory Central Locking (indicators dont blink on unlock)

Factory Central Locking (indicators dont blink on unlock)

Postby Blotto on Wed, 30 Jun 2010 1:24 +0000

Hi There,

in the last few days, my indicators have stopped blinking when i unlock my car (MY07 SR5)

is there a relay somewhere that controls this?

any help greatly appreciated, its hard to find your car in a carpark with 14 other white sr5's :P
Blotto
 
Posts: 8
Joined: Wed, 30 Jun 2010 1:21 +0000
Location: East Perth, WA


 

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Viper82 on Wed, 30 Jun 2010 4:03 +0000

Might be a blown fuse. do your indicators work at all? try the hazards also
Viper82
 
Posts: 375
Joined: Tue, 25 Aug 2009 4:38 +0000
Location: Adelaide S.A

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Blotto on Wed, 30 Jun 2010 4:06 +0000

Viper82 wrote:Might be a blown fuse. do your indicators work at all? try the hazards also


Yeah mate, all indicators work fine, lights still blink once when car i locked, just no blink when unlocked
Blotto
 
Posts: 8
Joined: Wed, 30 Jun 2010 1:21 +0000
Location: East Perth, WA

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Ringer on Wed, 30 Jun 2010 4:32 +0000

Mine have only ever worked when locking, i just thought that this was Toyota saving money. It makes sense for them to flash when unlocking but where is the sense in this world anymore!!!!!!!!!!!
Ringer
 
Posts: 73
Joined: Thu, 13 Aug 2009 11:42 +0000

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Viper82 on Wed, 30 Jun 2010 4:57 +0000

thats strange. mine blink once for lock and twice for unlock. must be something to do with the immobiliser system
Viper82
 
Posts: 375
Joined: Tue, 25 Aug 2009 4:38 +0000
Location: Adelaide S.A

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Blotto on Wed, 30 Jun 2010 5:11 +0000

mine USED to blink twice for unlock, then stopped out of the blue
Blotto
 
Posts: 8
Joined: Wed, 30 Jun 2010 1:21 +0000
Location: East Perth, WA

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Steve9R on Wed, 30 Jun 2010 6:26 +0000

i think you can actually disable the 'blinking' via a certain combination (like with the seat belt beeper).. perhaps thats happened by accident.. ?.. I dont know what the combination is though... i did read somewhere about being able to do it though.. ill have a look..

Steve
User avatar
Steve9R
Valued Contributor
 
Posts: 5248
Joined: Wed, 11 Apr 2007 1:00 +0000
Location: Melbourne, VIC

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Ringer on Thu, 01 Jul 2010 9:02 +0000

I went into my local dealer this morning and they are suppose to flash twice when unlocking and if the door isn't opened with in 20 seconds the doors are suppose to lock again. I told them mine never have so they are looking at it tomorrow. So i will let you know how to fix it then, thats if they pass the secret on but hey i know one of the mechanics .
Ringer
 
Posts: 73
Joined: Thu, 13 Aug 2009 11:42 +0000

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Steve9R on Sat, 03 Jul 2010 8:04 +0000

Sounds good mate.. yes please let us know ! ;)

Cheers
Steve
User avatar
Steve9R
Valued Contributor
 
Posts: 5248
Joined: Wed, 11 Apr 2007 1:00 +0000
Location: Melbourne, VIC

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Ringer on Sat, 03 Jul 2010 7:26 +0000

Went in an apparently they have to check a heap of wires etc..... Sounds like a money spinner to me but i told them it never worked and that it was something they should have picked up on...........Now it is 2 weeks out of warranty, why didn't you put this up 4 weeks ago Blotto!!!!!Well it is going in Monday again so will keep you informed.
Ringer
 
Posts: 73
Joined: Thu, 13 Aug 2009 11:42 +0000

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Gulfstream8 on Sun, 04 Jul 2010 7:29 +0000

Hello Ringer

Please check battery voltage..........If the voltage is under 12.5-12 volts the ECU will go into a power save mode (It will even stop the pre-prime of the fuel pump before start up). Your vehicle is at that age where it’s almost time to replace the battery.
User avatar
Gulfstream8
 
Posts: 524
Joined: Sat, 30 Jan 2010 8:20 +0000

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Blotto on Mon, 05 Jul 2010 6:13 +0000

Well,

on the weekend i went camping, left the radio on, battery went flat, jump started the car, and what do you know

the lights now flash twice on unlock!
Blotto
 
Posts: 8
Joined: Wed, 30 Jun 2010 1:21 +0000
Location: East Perth, WA

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Ringer on Tue, 06 Jul 2010 5:45 +0000

Hello Gulfstream8
I have already replaced the battery around a year ago as i put the one out of the lux in another car and the the battery is 700CCA so plenty of power and has plenty of volts coming out. Cheers for the tip though. Anyway i went into the Toyota shop yesterday and they looked at it and tried to tell me that my 07 SR5 model didn't come with that as it was an option with an alarm!!!!! What a Crock !!!! So a few of my mates have 05 SR5's and the lights flash and the re lock after 30 secs work on theirs so i will be going back again i suppose. What a pain in the rear end. I am really not a happy camper with Toyota!!!! But i still wouldn't buy a Nissan!!!! Sorry for swearing !!!!
Ringer
 
Posts: 73
Joined: Thu, 13 Aug 2009 11:42 +0000

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Blotto on Tue, 06 Jul 2010 9:00 +0000

Ringer,

mine is an 07, and does not have a factory alarm, just the factory immobiliser and it does flash twice on unlock (after my battery went flat)
Blotto
 
Posts: 8
Joined: Wed, 30 Jun 2010 1:21 +0000
Location: East Perth, WA

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Ringer on Tue, 06 Jul 2010 6:23 +0000

Cheers for that. My local Toyota are looking into it but Toyota themselves have said that some cars didn't have it installed. I think i will go bang my head on the wall as i might get somewhere then!!!!!!!!!!!!!!!!!!!
Ringer
 
Posts: 73
Joined: Thu, 13 Aug 2009 11:42 +0000

Re: Factory Central Locking (indicators dont blink on unlock)

Postby Mudchukka on Tue, 06 Jul 2010 7:57 +0000

Interesting...
I got my '05 Lux second hand around the start of the year and I've never seen it flash after unlocking.
The seat belt warning was already disabled and have since disabled everything else that needs to be.
Except the death rattle! :x
User avatar
Mudchukka
 
Posts: 11
Joined: Mon, 15 Mar 2010 6:58 +0000
Location: Wimmera Victoria

Re: Factory Central Locking (indicators dont blink on unlock)

Postby bansheebuzz on Tue, 06 Jul 2010 8:43 +0000

ringer, disconnect your battery and let it sit for 5 mins then reconnect, i have not seen an sr or sr5 without remote c/lock, im unsure about the workmates thou
05 SR5 Xtra Cab D4D
Mudgeeraba Auto Electrical
bansheebuzz
 
Posts: 495
Joined: Fri, 13 Mar 2009 1:54 +0000
Location: Mudgeeraba - Gold Coast

Re: Factory Central Locking (indicators dont blink on unlock

Postby ryangtge on Mon, 16 Jan 2012 9:28 +0000

Its a simple one guys... well took me 2hours to figure it out but its the do with the drivers seats seatbelt sensor. When i got my lux i disco'd the sensor to silence the beep. That cable either needs to be cut and twisted together under the seat or left connected. If disco'd and not shorted the lights wont flash on unlock. when using a key to unlock the doors they wont all unlock and some othet weird things. if you havent touched it, it could be a faulty sensor in the seatbelt clip.
ryangtge
 
Posts: 1
Joined: Mon, 16 Jan 2012 3:07 +0000

Factory Central Locking (indicators dont blink on unlock)

Postby Qwerty on Mon, 16 Jan 2012 10:29 +0000

Why disconnect wires under seats , when you can turn off the seatbelt buzzer through the dashboard menu ??
User avatar
Qwerty
 
Posts: 4281
Joined: Tue, 16 Aug 2011 12:56 +0000

Re: Factory Central Locking (indicators dont blink on unlock

Postby Rocket55 on Tue, 17 Jan 2012 10:33 +0000

ryangtge wrote:Its a simple one guys... well took me 2hours to figure it out but its the do with the drivers seats seatbelt sensor. When i got my lux i disco'd the sensor to silence the beep. That cable either needs to be cut and twisted together under the seat or left connected. If disco'd and not shorted the lights wont flash on unlock. when using a key to unlock the doors they wont all unlock and some othet weird things. if you havent touched it, it could be a faulty sensor in the seatbelt clip.


Hmmm.... not sure about that one :? Over time I've tryied the wire under the seat, plugged in/out same result.

Just to confuse things more my car (05 SR) always flashes when locked, but sometimes flashes when unlocked and sometimes does not flash. Can be within the period of the same day, 1 hour or only 1 minute. :? :? At first I also thought it was a voltage thing. But try it, no flash, try it no flash, open doors, bonnets, bash and crash, try it yes flash :D , try it again no flash. If it was a voltage thing, then opening doors and bring on the interior light does not help the voltage.

I have noticed that when I disconnect the batteries to do stuff, the behaviour of the flashing does change, so this definitely has something to do with it. :?

In the end I just gave up on it and put it down to somebodies gone nuts in my car with a pair of wire cutters and a soldering iron and I'm getting feed back from somewhere somehow :cry: but if others are doing it too, then maybe Toyota has something to answer to :evil:
Cheers Rod
__________________________________________________________________________________________
Bitumen ...... another waste of public funds
User avatar
Rocket55
Moderator
 
Posts: 7816
Joined: Wed, 16 Mar 2011 8:07 +0000
Location: Sutherland NSW

Next

Return to Electrical

Who is online

Users browsing this forum: Google [Bot] and 13 guests