Hi Tony,
Ive since found out that , i need the cable from the back of the OEM Sat/Nav to the back of the clock spring , the clockspring i have is for an 09/10 model Hilux, The newer clockspring is a straight fit,
So if you have the later model wheel with audio controls, the when you fit the cockspring in place, the audio plugs in the wheel click into the front side of the clockspring, and from behind, the cable goes back into the Sat Nav,.........
Its actually not a big job, provided you ahve the right parts, the cable that goes from the back of the clock spring to the radio is a 20 Pin plug but only uses 4 Pins...........
Im slowly collecting my bits for this and will probbaly have it done in a few weeks, as im taking my time and Fujitsu 10 was great in supplying the PIN outs.
heres a link to the wiring diagram for fitting audio controls with out changing the wheel bare in mind the link below is for a PRADO not a HIlux, but there pretty similar.
http://www.pradopoint.com/viewtopic.php ... ausio+muteCheers
Last bumped by Anonymous on Wed, 17 Apr 2024 2:41 +0000.