Brake pedal trigger - Redarc Tow Pro

Brake pedal trigger - Redarc Tow Pro

Postby DSR5 Lux on Sun, 21 Mar 2021 1:47 +0000

Gday,
I’m fitting a Tow Pro Elite to a 2019 SR5
I am looking to see if anyone can tell me which wire on the brake pedal switch I need to pick up for the tow pro unit. I found some information on the forum for a 2016 but just wondering if it’s the same.
Cheers Dan
DSR5 Lux
 
Posts: 2
Joined: Sun, 21 Mar 2021 1:42 +0000
Location: Portarlington VIC


 

Re: Brake pedal trigger - Redarc Tow Pro

Postby TOYZX on Sun, 21 Mar 2021 6:14 +0000

Best to run a wire all the way to the trailer plug along with the blue trailer brake wire. Fit a diode inline with the red brake wire too to prevent feedback from the brake controller to the car. Redarc make a sealed pre wired diode just for this purpose. Hope that makes sense mate.

Sent from my SM-G986B using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: Brake pedal trigger - Redarc Tow Pro

Postby DSR5 Lux on Mon, 22 Mar 2021 4:39 +0000

It does mate! Perfect thank you
DSR5 Lux
 
Posts: 2
Joined: Sun, 21 Mar 2021 1:42 +0000
Location: Portarlington VIC


Return to Electrical

Who is online

Users browsing this forum: No registered users and 9 guests