2006 - 2012 wiring looms pin locations

2006 - 2012 wiring looms pin locations

Postby Steve lucas on Mon, 30 Oct 2017 6:14 +0000

Hey guys, im new to this page. Im having some trouble with helping a mate fit a 2012 engine into his 06 lux. It keeps blowing the ecu/ign/gauge fuse (10amp) under the dash every time it goes to crank, i said the harnesses are different but need to know if anyone can shed some light or point me in the right direction to find the pin wiring locations for both the engine harness and the dash/fusebox harnesses on both models. They are both SR5's. Im thinking the wiring isnt correct as everything worked before the swap out on both vehicles. I have tried going through toyota but all they would give me was a picture of the plugs, not what pin was ment to go where...

Thanks in advance for any help guys!!
Steve lucas
 
Posts: 1
Joined: Mon, 30 Oct 2017 5:47 +0000
Location: Mackay queensland


 

Re: 2006 - 2012 wiring looms pin locations

Postby HK1837 on Mon, 30 Oct 2017 6:29 +0000

I downloaded a full Vigo wiring diagram PDF. It is about 200 pages and shows each connector and pins.
HK1837
 
Posts: 1060
Joined: Tue, 17 May 2011 1:31 +0000

Re: 2006 - 2012 wiring looms pin locations

Postby DeadlyBeast on Mon, 30 Oct 2017 6:47 +0000

Moved post from Gen 8 general discussion to correct section
________________________
2007 SR5 D4D Auto
2014 SR D4D Auto
Build Thread
DeadlyBeast
Moderator
 
Posts: 1914
Joined: Sat, 26 May 2012 7:42 +0000
Location: Top End


Return to Electrical

Who is online

Users browsing this forum: No registered users and 16 guests