Ironman Canopy Wiring

[floody_1985]

G'day everyone,
I recently bought a second hand Ironman canopy for my Hilux, but can't seem to find any info online about how to wire in the brake light and internal light.

There's a single cable coming out the front of the canopy with a single plug attached.

Any ideas? Otherwise I might have to just pull it apart and work out what wire does what and rewire it.

Cheers

Floody

[Ricky840]

Hey mate,
Any luck with this? I’m in the same boat.
Picked up a canopy for $300 [emoji4] same color and everything, just needed to replace the rear window and a coupe other little things but cans seem to find where that wire belongs??
Rick


Sent from my iPhone using Tapatalk

[creaky]

Have you got a quote for the rear window yet ?
Ask ironman for the fitting instructions. The wiring loom may be a separate item / kit with it’s own instructions. You should be able to work it out and wire up yourself if you’re savvy with electronics. Could also get a quote for the loom from Ironman to make it easier.

[HK1837]

Is there 3 x wires? My Caddy Systems canopy had 3 wires. One for 0V, one for brake light and one 12V for the inside light.

[Ricky840]

I have already replaced the rear window, about &400 it was.
The wire dose have 3 wires, I assume it runs down to the harness under the car I just haven’t had time to have a look yet


Sent from my iPhone using Tapatalk