Ignition barrel removal?

[lerroy]

Hi all

I have a really worn key on a SR 2007, it wasn't turning the barrel. Unfortunately only have one key, I went to get another cut from the Vin no. but the previous owner looks to have changed the barrel.

The locksmiths did me a wet key copy of the less worn side so I'm able to now turn too ACC (after a bit of contact cleaner in the barrel)

I want to remove the barrel to take to locksmiths. Just having trouble locating the push pin so it's able to be removed.

Anyone have any ideas?

[dabbler]

From my Gregory's repair manual:

1 Turn ignition key to ACC position
2 Use a small screwdriver or pick to depress the key lock cylinder release button.

http://imghostr.net/image/3Zka

http://imghostr.net/image/3b5i

Hope it's the info you need.

[lerroy]

Cheers, thanks for this.
Worked great