boxhead55,Anthracite wrote:boxhead55 wrote:There is an earth you have to connect and make sure your clutch switch is connected. There is no light for the cruise in the dash tho
Where is this elusive earth you say...
Ran through with a multimeter again and found everything is reporting correctly.
Clutch is definitely connected.
I think you mentioned E6-3 in one of your posts, not sure what that is for.
What I am staring at.. (I think im looking at this right...)
(using tonymtber post as reference..)
boxhead55 wrote:pictures
rorytate wrote:hey all,
Am a new member just bumped into the thread of cruise control and did some works on it but failed.
I have fitted the OEM stalk, manually wired it up from the under steering to the ECU.
Unfortunately it does not work! Any suggestion or anyone have successfully done it?
Am driving a 2012 2.5Lux 2KD-FTV
I suspect that there is no speed info being sent from the meter cluster to the ECU, which i have been going thru much sites and no specific informations..
Any comments of suggestion?
patton wrote:hello, one doubt. Mine is a 2011 2.5 manual. Double cab gx model. Will the cruise control worked in my car?
patton wrote:where i have to look? under the glove box or under the steering wheel?
patton wrote:finally i found some time to do it. i am in europe so today the forum looks outside down. weird thing i never experience..loll
[img][img]http://s10.postimg.org/ruejwjgqd/IMG_20160331_193921.jpg[/img][/img]
[url]<a href='http://postimg.org/image/ruejwjgqd/' target='_blank'><img src='http://s10.postimg.org/ruejwjgqd/IMG_20160331_193921.jpg' border='0' alt="IMG 20160331 193921" /></a>[/url]
Users browsing this forum: No registered users and 9 guests