Redarc BCDC1225 wiring guide
Posted: Thu, 02 Apr 2015 8:19 +0000
Hi Guys.
I have searched and searched with google and using NewHilux but haven't quite gotten the answers I need.
My question relates to the Redarc BCDC1225 wiring. I have read the manual but just need some clarification. I am sure there are a lot of you who have already configured your dual battery systems.
Overview:
I have a 2013 Toyota Hilux with an ARB canopy. I want to install a dual battery system in the back of my canopy. I also want to do most of the work myself as in drilling hole in tub and installing the cable, battery box and Redarc BCDC 1225 battery charger. I will then take it to an auto electrician just to check my configs and make any adjustments as I am by no means an electrical person.
My questions are:
1.) Can I just have 6m 6B&S red cable from starter battery to the tub or does it have to be red and black?
2.) Can I just splice and solder the blue (ignition) cable to the red cable and solder or does it have to be linked to an existing ignition cable?
3.) Where does the yellow Battery config wire go?
4.) What amperage fuse do I use from the AUX battery to the load?
5.) Where does the actual voltage drop take place? Between the starter battery and the Redarc battery charger or from the Redarc Battery charger to the load (fridge)?
This has been an epic research project for me but I have spent hours trying to figure all this out. I hope your answers shed more light onto this much talked about subject.
Thanks guys..
DapperDavo..
I have searched and searched with google and using NewHilux but haven't quite gotten the answers I need.
My question relates to the Redarc BCDC1225 wiring. I have read the manual but just need some clarification. I am sure there are a lot of you who have already configured your dual battery systems.
Overview:
I have a 2013 Toyota Hilux with an ARB canopy. I want to install a dual battery system in the back of my canopy. I also want to do most of the work myself as in drilling hole in tub and installing the cable, battery box and Redarc BCDC 1225 battery charger. I will then take it to an auto electrician just to check my configs and make any adjustments as I am by no means an electrical person.
My questions are:
1.) Can I just have 6m 6B&S red cable from starter battery to the tub or does it have to be red and black?
2.) Can I just splice and solder the blue (ignition) cable to the red cable and solder or does it have to be linked to an existing ignition cable?
3.) Where does the yellow Battery config wire go?
4.) What amperage fuse do I use from the AUX battery to the load?
5.) Where does the actual voltage drop take place? Between the starter battery and the Redarc battery charger or from the Redarc Battery charger to the load (fridge)?
This has been an epic research project for me but I have spent hours trying to figure all this out. I hope your answers shed more light onto this much talked about subject.
Thanks guys..
DapperDavo..