NewHilux.net

Guys,

Seeing I worked this out today, I thought I would post it up because it is handy to know. Pinouts are based on looking at the front side of the plug that clips into the radio with the clip "XX"in the diagram facing up.

Code: Select all

-------------XX--------------
| 1    3            7    9  |
| 2    4   5    6   8   10  |
-----------------------------

 1 = Right Front Speaker + (White)
 2 = Right Front Speaker - (Blue)
 3 = Left Front Speaker + (Pink)
 4 = Right Front Speaker - (Purple)
 5 = Earth (Brown)
 6 = No Connnection
 7 = + 12 Volt Accessory (Grey)
 8 = No Connnection
 9 = +12 Volt Battery (Blue/Yelow Stripe)
10 = +12 Volts Dash Lights (Green)


The small connector facing the same way looks like this:

Code: Select all

---------XX---------
| 1   3    4    5  |
| 2             6  |
--------------------
1 = Right Rear Speaker + (Red)
2 = Right Rear Speaker - (White)
3 = No Connection
4 = No Connection
5 = Left Rear Speaker + (Black)
6 = Left Rear Speaker - (Yellow)


Note that I did not test the Rear speakers as my Rig is a SR that does not have them and I am not bothering with Rears when I get my Amp in.

good to know...thanks mate

Bump

Mods, can you sticky this topic?

any word if there the right ports for the rear speakers...

Jack S wrote:any word if there the right ports for the rear speakers...

Jack, I have not pulled the rear doors apart but it is my understanding the speaker wires are there. I got some speaker spacers off eBay in the US. A lot of people replace the front speakers and put them in the rear.

good stuff , i was just starting tolook at putting more speakers in ( rear door) so this is handy to know
cheers rod

So Rod.. I need to wire a constant power to my unit so when the truck is turned off the unit stays on.. the

7 = + 12 Volt Accessory (Grey)

is that a signal wire ? eg, when it goes dead the unit shuts off ? I'd assume so looking at the other wires.. so ill break a wire a switch Acc / +12 to it so i can choose power source..

Cheers !
Steve

I <3 you rod, this is the exact info I'm after
I just upgraded all my speakers and I'm sure I have some of them in backwards but I can easily swap the connectors now that I know which is which

any one know if you can easly upgrade the radio out of a 05 current shape to a bluetooth? (genunie)

Yes it is possible a mate of mine had it done at his local toyota dealer

I just installed new speakers into my hilux. What a job. Was a massive effort.

Somehow I have upset the factory rear view camera. When you go right up close to the rear view camera, it captures your movements, walk away and it freezes. As for an image when your in the cab just reversing, I get a grey screen unless as I say, you wave you hand around it up close.

Any ideas what wire I need to look at or does this sound like a warranty job?

Any ideas what pin position video input for a reversing camera would be?

thanks for the time saving info! is it better to buy small pin connectors to plug into existing toyota plugs, or just cut off old plug and solder old wires to my new head unit leads?

Hi,

Does anyone know which harness has the steering wheel controls? i'm looking to install a PAC SWI-Jack so they work with the factory steering wheel buttons.

man i so want steering controls nyone wana sell me their steering wheel???? lmao

Yeh I'm interested in the steering wheel controls too. Can u but from Toyota and fit to a SR wheel?? And plug in to sr loom?

Does anyone know what the steering wheel controls are?

I have a avn726ea and I can't work it out.....

Gday to everyone just joined and pick up a new dual cab sr5 in a week can't wait..
Anyway just looking at the posts about the steering wheel controls, chances are that they work of a clock spring which is generally a 2 wire sometimes 3 system which communicates between ur head unit and steering wheel.

I recently sold my lancer which I installed a pioneer avid unit in, I had to get a steering control interface from PAC audio which was around 2 hungee...pending on what brand head unit depends on which interface you purchase ( different brands have different frequencies) As far as which wire go back to the clock spring( assuming it does). Is pretty hard to tell without a wiring diagram. Which I will probably be needing in a few weeks if anyone has.

you can buy a plug from autobarn for around 20$ just plug and play for the headunits no messing with wires. but for amping the speakers this will be very handy thank you!.

as for the rears so there are wiring in the rear for them? i shall put the stocks in he rear when i upgrade

Funnily enough i was working on this today

found this handy link

http://www.installdr.com/Harnesses/Toyota-Wiring.pdf