External mic for blue tooth head decks

Re: External mic for blue tooth head decks

Postby benlux10 on Mon, 11 Jan 2016 9:51 +0000

U need to order the SD before u do anything.
benlux10
 
Posts: 68
Joined: Fri, 12 Oct 2012 9:02 +0000


 

Re: External mic for blue tooth head decks

Postby Dohsh77 on Wed, 13 Jan 2016 7:55 +0000

Sd card pzq60-00540
Can operate the radio pzq60-00525
I get this card it open the radio but no audio output
Someone tell me i must connect with amplifier
Dohsh77
 
Posts: 17
Joined: Fri, 08 Jan 2016 8:28 +0000
Location: Egypt ismailia abo Dahshan

Re: External mic for blue tooth head decks

Postby Dohsh77 on Wed, 13 Jan 2016 8:33 +0000

I tried this sd card pzq60-00540 with this radio pzq60-00525. It opened but no soud found
Dohsh77
 
Posts: 17
Joined: Fri, 08 Jan 2016 8:28 +0000
Location: Egypt ismailia abo Dahshan

Re: External mic for blue tooth head decks

Postby Dohsh77 on Thu, 07 Jul 2016 10:39 +0000

ScubaDooba wrote:I think the 2006 models only had the 20 pin plugs, whereas your radio definitely has the 28 pin. If so then I believe you will need a harness to convert. This has been covered previously, so do a search and you should find all the info you need.
I want to add Av cable to this radio
Dohsh77
 
Posts: 17
Joined: Fri, 08 Jan 2016 8:28 +0000
Location: Egypt ismailia abo Dahshan

Re: External mic for blue tooth head decks

Postby kerode on Mon, 31 Oct 2016 9:40 +0000

for anyone looking for mic/av/aux etc for the 11-14 model units (28 pin), here's your solution for under $30 posted! Been using one for 12 months now with no issues!

https://www.ebay.com.au/itm/131645226292
kerode
 
Posts: 107
Joined: Wed, 16 Jul 2014 2:47 +0000
Location: Qld, Australia

Re: External mic for blue tooth head decks

Postby sixes on Tue, 03 Sep 2019 10:48 +0000

Thanks for the info kerode, Link still works.

I picked up a 00535 stereo and of course the mic doesn't work. Hopefully this will do the trick

Reverse camera is intermittent. Guessing the purple/white wire has a dodgy connection somewhere although reading somewhere that the unit needs the signal quick else it won't work. How do I get a quicker signal?? Camera works fine initially on start up when in reverse...
sixes
 
Posts: 46
Joined: Sat, 25 Aug 2018 2:08 +0000
Location: Victoria

Previous

Return to Electrical

Who is online

Users browsing this forum: No registered users and 11 guests