Very happy customer
Posted: Tue, 19 Mar 2013 9:58 +0000Well I really needed a set of seat covers to suit my cruiser as the seats were too clean and in good shape to be wrecked from having drink spillages, food, etc go onto them.
So I had looked around and decided to purchase a set of SupaFit canvas seat covers, which were local to me and made their own covers right here in WA plus they were priced very well compared to others that I had seen.
They had them made quicker than I expected, took delivery of them within 8 days from order, they came neatly packaged in a sealed bag... Believe it or not, there is covers to suit all three rows in my cruiser within this bag!
SupaFit also covered my centre console lid for a small fee, but they needed the lid for a day or two to custom make a cover for it. The fitment of the cover on the lid is a perfect snug fit and could be easily removed if need be.
As you can see, the top part of the passenger seat (featured below) just slots right over the top of the seat and the velcro connects up to the opposite side.
The base of the seat fits up the same way, it has velcro straps underneath that connect to the back, and the back sides wrap around to each other making the seat cover very firm without allowing movement.
Simply push the lower velcro part through the gap and join it up to the other side of the cover as shown.
The back of the seats have very large pockets, great for the kids books, etc.
The headrests were a simple fit also.
Eyelets for the headrests to fit through which aligned really well.
The end result with all three rows done.
Couldn't be happier, they fit extremely well, better than I had originally expected and it all looks factory, blending in with the colour scheme of the interior. One thing for sure is the design of the middle row seatbelt normally you need to unbolt one side of the seatbelt to fit the cover, but SupaFit designed the covers in such a way you don't have to - pretty sure this would be the same for other vehicles as well.
The covers offer great protection for the original seats which were in perfect condition to start with, so I will know they will be kept in pristine condition the day they get removed, even after a few drink spillages by the kids, not to mention myself (yes it has already happened) or the wife! and with the lower and upper portion of the seats being separate, it makes it a breeze to remove one piece to clean.
It's great to see a very high quality Australian made product being done right here in WA, I would recommend these covers to anyone.
Cheers, Dave
So I had looked around and decided to purchase a set of SupaFit canvas seat covers, which were local to me and made their own covers right here in WA plus they were priced very well compared to others that I had seen.
They had them made quicker than I expected, took delivery of them within 8 days from order, they came neatly packaged in a sealed bag... Believe it or not, there is covers to suit all three rows in my cruiser within this bag!
SupaFit also covered my centre console lid for a small fee, but they needed the lid for a day or two to custom make a cover for it. The fitment of the cover on the lid is a perfect snug fit and could be easily removed if need be.
As you can see, the top part of the passenger seat (featured below) just slots right over the top of the seat and the velcro connects up to the opposite side.
The base of the seat fits up the same way, it has velcro straps underneath that connect to the back, and the back sides wrap around to each other making the seat cover very firm without allowing movement.
Simply push the lower velcro part through the gap and join it up to the other side of the cover as shown.
The back of the seats have very large pockets, great for the kids books, etc.
The headrests were a simple fit also.
Eyelets for the headrests to fit through which aligned really well.
The end result with all three rows done.
Couldn't be happier, they fit extremely well, better than I had originally expected and it all looks factory, blending in with the colour scheme of the interior. One thing for sure is the design of the middle row seatbelt normally you need to unbolt one side of the seatbelt to fit the cover, but SupaFit designed the covers in such a way you don't have to - pretty sure this would be the same for other vehicles as well.
The covers offer great protection for the original seats which were in perfect condition to start with, so I will know they will be kept in pristine condition the day they get removed, even after a few drink spillages by the kids, not to mention myself (yes it has already happened) or the wife! and with the lower and upper portion of the seats being separate, it makes it a breeze to remove one piece to clean.
It's great to see a very high quality Australian made product being done right here in WA, I would recommend these covers to anyone.
Cheers, Dave
