Piratepete wrote:Ok. So don't be upset if you don't get it the first time.
1) switch ignition to on
2) make sure dimmer switch is in lowbeam and not pushed forward into constant high beam
3) turn light switch onto parker setting
4) turn ignition off
5)Hold headlights into highbeam
6)While highbeam is pulled on, turn to headlight than back to parker ( not auto) 5 times
7)Release high beam
( the headlamps will flash in relation to what setting they are currently set on. It should flash 3 times with the setting being 0 )( if they don't flash you and not in the settings.)
8) Hold highbeam on again and turn between headlight and parker setting.
The number of times you turn it will vary the sensitivity.
Once -40
Twice -20
Three 0
Four +20
Five +40
9) Once you have turned between headlamps and parker for your desired preference release the highbeam.
The headlamps will flash for the number that you have selected.
And once it flashes say once, you are all complete![]()
![]()
I personally have mine set to -40 and find it perfect but if you want to try -20 give it a shot.
Now bend over touch your toes while turning your head in circles.
Users browsing this forum: No registered users and 3 guests