Just been reading through this old thread as Im looking at replacing the factory alloys on my SR5, Ideally I want to drop down to 16' rim for a bit more sidewall to play with. I currently have the 17 x 7.5 +30 factory alloys with 265/65/17 BFG KM3.
Looking at going to 16 x 8 + 30 ROH alloy and running a set of 265/75/16 Duratracs or 265/70/16 if the 75 is to tall
Wheels:
https://roh.com.au/wheels/trophy/My concern is the clearance on the UCA give the 0.5" wider rim and retaining the +30 offset. The same wheel in 17" is 9' wide which I don't want.
Is anyone running 16 x 8's with a offset greater than "0" my other option is 16 x 8 with a 0 offset.
Cheers
Jordon