Noidea wrote:Things to note:
When ordering this kit there are different small hose sizes and reducer sizes depending on which vehicle you have. I told them I had a hilux but they still got me to check my fitting sizes just to be sure so if they ask you need the 5/8" hose and reducers...
The fitting on the turbo is actually a 1 inch fitting (as you can see in the first 2 photos) so if you had more of the 1 inch hose you could run it directly from the turbo to the filter without the need for any reducers but the kit only comes with about a foot of 1 inch hose which isnt enough so if you were to tell them you need about a metre more of the 1 inch when you order then you could do this. This would also negate the need to cut the original pcv pipe.
Let me know what you guys think
A big thanks to Josh (Noidea) for the installation guide.
Installed the kit late last year:
Only had to disconnect the air filter duct
Ordered 1" hose as Josh suggested. Only had to use reducer and high temp RTV silicon on top (inlet) hose.
Routed the hoses slightly differently.