p2006
Posted: Sun, 22 Apr 2018 1:32 +0000
Hi All looking for some suggestions.
Started getting p2006 codes about 300-400km or so after doing a service, fuel filter, air filter , oil filter and change (plus flush treatment) (vehicle has just gone 200,000 km sr5 diesel).
Was towing at the time (about 1.2t) first time I got the code I cleared it by is connecting the battery and continued on for about 500km with no issues then it happened again (was on a trip up the coast) cleared the code. After this picked up a code reader and it didn't happen again for about 800km then happened again and I was able to read the code p2006 (intake manifold runner control stuck closed bank 1).
Only happen when towing in D3 not pushing hard or high revs.
Anyone have any suggestion, have checked a few things but would like to start from the start
thanks in advance
Started getting p2006 codes about 300-400km or so after doing a service, fuel filter, air filter , oil filter and change (plus flush treatment) (vehicle has just gone 200,000 km sr5 diesel).
Was towing at the time (about 1.2t) first time I got the code I cleared it by is connecting the battery and continued on for about 500km with no issues then it happened again (was on a trip up the coast) cleared the code. After this picked up a code reader and it didn't happen again for about 800km then happened again and I was able to read the code p2006 (intake manifold runner control stuck closed bank 1).
Only happen when towing in D3 not pushing hard or high revs.
Anyone have any suggestion, have checked a few things but would like to start from the start
thanks in advance