D4D rebuild: Balance shaft bearings

Turbo, Manifolds, Exhaust, Intercooler, Internals etc

D4D rebuild: Balance shaft bearings

Postby fisherman*pete on Tue, 05 Jun 2012 9:19 +0000

Gday everyone, im currently rebuilding my d4d and need to get hold of some bearings for the balance shafts.
Toyota bless their souls only sell them as part of the block.. why i dont know. There must be a way to get hold of these bearings as im sure many many d4d owners have had rebuilds by now. The block cant be acid dipped with the bearings in, once the bearings come out cant reuse them and besides mine are well and truly buggered. If anyone knows where i can get some aftermarket ones i would be most grateful :D
fisherman*pete
 
Posts: 8
Joined: Thu, 25 Aug 2011 6:16 +0000


 

Re: D4D rebuild: Balance shaft bearings

Postby andy666 on Wed, 06 Jun 2012 4:48 +0000

Best bet is to ask the engine rebuilders who are doing the machining of your head etc to see if they can source some
666 High Idle Kits to suit 05+ hilux Available Here
My Build Thread.
User avatar
andy666
 
Posts: 908
Joined: Sun, 12 Dec 2010 6:07 +0000
Location: Brisbane

Re: D4D rebuild: Balance shaft bearings

Postby fisherman*pete on Mon, 11 Jun 2012 10:06 +0000

Ive asked around and apparently you cant buy these bearings anywhere. There sayin i could either get them made $$$$$, or get rid of the balance shafts. which they have done before without much consequence. i was quite suprised when they suggested it but, the more i think about it the less ridiculous it seems. Any thoughts on this?
fisherman*pete
 
Posts: 8
Joined: Thu, 25 Aug 2011 6:16 +0000

Re: D4D rebuild: Balance shaft bearings

Postby MrLuxx on Tue, 12 Jun 2012 7:04 +0000

Try engineAustralia.com.au I'm Pritty sure that's where I got ballance shaft bearings for the POS navara I had before the lux.
Pat
07 Dual Cab
Build Thread viewtopic.php?f=41&t=11437
User avatar
MrLuxx
 
Posts: 80
Joined: Sun, 25 Sep 2011 12:21 +0000
Location: Portland Vic

Re: D4D rebuild: Balance shaft bearings

Postby fisherman*pete on Thu, 14 Jun 2012 3:21 +0000

Engine Australia is where i got my rebuild kit from, they dont even have the part numbers for bearings in their catalogues. neither does anyone else for that matter.
fisherman*pete
 
Posts: 8
Joined: Thu, 25 Aug 2011 6:16 +0000

Re: D4D rebuild: Balance shaft bearings

Postby fisherman*pete on Tue, 31 Jul 2012 7:54 +0000

I took the engine to Moore and sons diesel engine rebuilders in welshpool to get the block machined and they have done several 1kds and i asked what they would do.
because the block cant be acid dipped with bearings in if the bearings are ok the block is hot washed and bearings left in and reused. in my case the bearings were shot and the balance shafts deleted and the oil feeds blocked off.. so no balance shafts. there now sitting on my shelf. they have done a few like this now and havnt had any complaints. so hopefully it will be all good.
apparently the problem is theres only one oil feed at the rear bearing and has to feed up to the front two bearings and its just not sufficient to maintain the bearings.
fisherman*pete
 
Posts: 8
Joined: Thu, 25 Aug 2011 6:16 +0000

Re: D4D rebuild: Balance shaft bearings

Postby fisherman*pete on Sat, 18 Aug 2012 3:01 +0000

the engine is back together and running just like a new one deleting the balance shafts has made no difference to the performance or the smoothness of running whatsoever. so now its just a case of time will tell if theres any long term consequences.
fisherman*pete
 
Posts: 8
Joined: Thu, 25 Aug 2011 6:16 +0000


Return to Engines

Who is online

Users browsing this forum: Google [Bot] and 2 guests