by camwill69 on Sat, 04 May 2024 12:18 +0000
You will not regret that purchase. What i did is rust proofed the holes (Shell Ensis fluid wax) that I drilled and then sealed them with Sika so rust and dust did not become an issue.
There is only enough bolts for every second hole so I put a Series 500 screw in the other one's to locate it while I did the bolt holes.
Make sure you get any swarf out from under the liner after you drill the holes.
Regards,
Camwill69
Last bumped by Anonymous on Sat, 04 May 2024 12:18 +0000.