TRS build
Posted: Sun, 10 Sep 2017 7:21 +0000
So the body lift went in today, fairly straight forward and the instructions were pretty good!
There was a few fiddly bits like the radiator drop brackets [emoji48] but nothing a few beers couldn't get you through!
spent about 6 hours doing it but I wasn't doing the lift the whole time, spent most of my time cleaning and did the rear seat mod while it was out too.
Half way there
Had to modify the cab and rubber boot holder a little as the 4wd gear stick was hitting on the body after it was lifted, if I put it back together like this the rubber boot would have stopped you from being able to change into 2 high or 4 high
Just bent the flap of the body down, plenty of room now
and cut a section out of the plate that holds the boots down
There was a few fiddly bits like the radiator drop brackets [emoji48] but nothing a few beers couldn't get you through!
spent about 6 hours doing it but I wasn't doing the lift the whole time, spent most of my time cleaning and did the rear seat mod while it was out too.
Half way there
Had to modify the cab and rubber boot holder a little as the 4wd gear stick was hitting on the body after it was lifted, if I put it back together like this the rubber boot would have stopped you from being able to change into 2 high or 4 high
Just bent the flap of the body down, plenty of room now
and cut a section out of the plate that holds the boots down