Oggy extract's a digit (finally)

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Oggy extract's a digit (finally) camera installs

Postby 07luxyTD on Wed, 14 Aug 2013 7:19 +0000

oggy wrote:Bought one of the A-sure units some time back. It now has issues loading the navigation software :? But i guess one of the main reasons i did buy it was to have a camera setup .
Image


Hey Oggy tell us bout those tyres your running on the lux, By those tyre tracks looks like there atleast 25"wide :lol: :lol: :lol:
"Lucky you weren't cut off by my stihl"

My build thread viewtopic.php?f=41&t=13794
My Landcruiser Build http://www.newlandcruiser.net/phpbb/vie ... 90&start=0
User avatar
07luxyTD
 
Posts: 2826
Joined: Wed, 22 Feb 2012 5:15 +0000
Location: Quorrobolong, NSW


 

Re: Oggy extract's a digit (finally)camera installs

Postby oggy on Thu, 15 Aug 2013 2:27 +0000

No Alby, I'm not related to dute :lol: just find it gives you an extra couple of metres of vision and you can see what the other side of a drop off looks like in advance 8-) .

Ross, I believe those tracks were from the kleenheat gas delivery truck... I haven't put duels on yet....hmmm, there's an idea. :!: a set of clip on duels, like on some tractors.... :roll:

Edit: measured exactly how much more I can see out the front ;) 15 feet or 4.6 m to be precise 8-) can see right up to 30 cm from front of bar now 8-)
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally) ARB twin compressor ins

Postby oggy on Sun, 18 Aug 2013 7:24 +0000

Lashed out on a twin ARB compressor nearly 12 months ago ;) Been sittin in shed up until 3 weeks ago :? Finally decided how i wanted to set it up :roll:
Image
Twins are a bit of a prick to get under the bonnet of a 2012 , and there isnt a lot of room in the compartment under the extra cab rear seats :? I did contemplate mounting it up under the tray (since they are meant to be fully sealed), but the thought of a $500+ compressor rusting under the tray didn't excite me :? So i thought bugger it , in the toolbox you go my friend 8-) I wanted as much air flow as possible so i didn't go with the pissy 1/4 inch lines or the crappy braided stuff :( Went for 3/8 hydraulic 2 wire hose from the compressor to tanks , as it can handle a lot of heat and over 2200 psi 8-) made the hoses up myself ,so i could get the lengths spot on 8-)
Image
Image
Went for twin 9 liter Air on board tanks, linked with 10 mm black plastic air line and an outlet on either side of the tray behind the cab. Again used the 10 mm black plastic airline with the nitto push in fittings.
Image
and finished it off with a couple of male hydraulic hose coupler covers to keep the crap out 8-)
Image
Works a treat,no extra pressure switches or valves or regulators. turned her on after a week and the compressor didn't start , so holds a charge like a champ 8-) (and yes it does work :roll: )
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby ajh on Sun, 18 Aug 2013 7:54 +0000

Switch and camera set up is tops!
User avatar
ajh
 
Posts: 1439
Joined: Sun, 12 Aug 2012 1:57 +0000
Location: Gold Coast, QLD

Re: Oggy extract's a digit (finally)

Postby kyle300exc on Mon, 19 Aug 2013 6:28 +0000

Ogman..what is the output on the twins? Going to have to look into a new compressor myself, nice set up mate. Think I may pop in and say G'day after all and bring my socket set with me :? :lol:
Kyle


Never, under any circumstances, take a sleeping pill and a laxative on the same night.
User avatar
kyle300exc
Moderator
 
Posts: 8567
Joined: Mon, 20 Sep 2010 12:32 +0000
Location: Narellan

Re: Oggy extract's a digit (finally)

Postby oggy on Mon, 19 Aug 2013 8:08 +0000

ajh wrote:Switch and camera set up is tops!

I'm rapped with it all, ajh, Some of my mates thought that it was a factory option, so was pretty happy with that 8-)
kyle300exc wrote:Ogman..what is the output on the twins? Going to have to look into a new compressor myself, nice set up mate. Think I may pop in and say G'day after all and bring my socket set with me :? :lol:

Kyle, it depends on the load. Quoted figures are 174 lpm @ 0 psi. and 132 lpm @ 29 psi . Pressure switch is 150/ 135 psi, by using a couple of tanks you get a shit load more air before it drops off. 8-) 8-)
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby oggy on Mon, 26 Aug 2013 5:38 +0000

So, brought a few cheap ebay light bars and whacked em on all of our quads
Image
Work a treat 8-) 120w , figured if i can't kill them on a bike in the mud, water and shit , then surely they would survive on the lux 8-) . So went for a 120w bar again but a single row in 10w .
Image
Image
Damn its good 8-) Range is every bit as far as high beam but at 10 250 lumens its freaking awesome. Looking at getting a pair of 11 inch ones to put in the hoops on the side of the bar to give a bit more light to the side , for those sneaky hoppers :? Oh, just a word of advice :? when you are setting a bar up, don't be tempted to "look into the light" :roll: saw spots for a good 10 minutes :( :? :lol: :lol:
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby amitch888 on Mon, 26 Aug 2013 7:18 +0000

Theif :o I'd pondered about using hydraulic hose for the same job, more so on an endless air setup due to the heat off the engine 8-)

Very neat work on your build 8-) but come on, fess up, what's held on by fencing wire or hay band???
FCCW
Mitch's Build

Education is what you get when you read the fine print, experience is what you get when you don't.
User avatar
amitch888
Moderator
 
Posts: 5231
Joined: Fri, 16 Apr 2010 7:18 +0000
Location: Tennyson, Vic

Re: Oggy extract's a digit (finally)

Postby oggy on Mon, 26 Aug 2013 7:29 +0000

amitch888 wrote:Theif :o I'd pondered about using hydraulic hose for the same job, more so on an endless air setup due to the heat off the engine 8-)

Very neat work on your build 8-) but come on, fess up, what's held on by fencing wire or hay band???

:lol: :lol: :lol: :lol: :? At the moment i think I'm about the only thing that is held together by fencing wire :? :lol: :lol: :lol:
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)Snorkel

Postby oggy on Fri, 13 Sep 2013 1:53 +0000

The young bloke came home from school the other day to find that the lux had grown one of these
Image
He's more keen than me to try it out. I told him perhaps i could put an air compressor outlet in the cab and we could pressurize her, move the camera to the top of the snorkel and there you have it submalux :roll: Little shit thought it was a great idea :lol: :lol: :lol:
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby ajh on Fri, 13 Sep 2013 2:20 +0000

Bloody great idea! Starter motor and power steering won't last long doing that as I found out.
User avatar
ajh
 
Posts: 1439
Joined: Sun, 12 Aug 2012 1:57 +0000
Location: Gold Coast, QLD

Re: Oggy extract's a digit (finally)

Postby oggy on Sat, 14 Sep 2013 4:36 +0000

20,000k service the other day. Asked them to do the factory fuel filter as well (apparently they do it at 40,000 unless you ask :shock: ). Anyhow this is how she came out
Image
Image
Pretty happy with that ;) Primary is obviously catching a lot of the crap ,as are the filters on our overhead tanks 8-) Certainly won't be changing it any sooner than that in the future 8-)
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby Alby on Sat, 14 Sep 2013 5:03 +0000

Mate that is that clean you could resell it on EBay :lol: :lol:
On the internet you can be anything you want. It is strange that so many people choose to be stupid!
User avatar
Alby
 
Posts: 6673
Joined: Tue, 03 Jul 2007 1:00 +0000
Location: Sydney, NSW

Re: Oggy extract's a digit (finally)

Postby boxhead55 on Sat, 14 Sep 2013 5:04 +0000

That's good if if has done 20000
This one had only done
5000 km
Image

So I guess all is good in your truck.
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: Oggy extract's a digit (finally)

Postby boxhead55 on Sat, 14 Sep 2013 5:05 +0000

And yep I know it is out of a cruiser but had only done 5000 km.
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: Oggy extract's a digit (finally)

Postby oggy on Sat, 14 Sep 2013 5:13 +0000

Jesus :shock: were they running sump oil in the tank :? We only use BP on farm 8-)
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby boxhead55 on Sat, 14 Sep 2013 5:18 +0000

oggy wrote:Jesus :shock: were they running sump oil in the tank :? We only use BP on farm 8-)

Well it is a over head farm tank and that is a Rocyo filter. After talking with the customer he said he would change his over head tank filters. Whether he did or not I don't know. But that had only done 5000 and the complaint was lack of power.
User avatar
boxhead55
 
Posts: 2864
Joined: Sat, 15 Jun 2013 3:46 +0000

Re: Oggy captains a battleship

Postby oggy on Wed, 25 Sep 2013 3:12 +0000

So got the fuel filter light sorted. Had to go to Wagga after Henty field days, and copped my fourth light :? Bypassed my primary to see if that was causing to much resistance (i hadn't changed it at that stage :roll: :roll: ) and bugger me still got the damn light at Lockhart (50kms) reset and made it home this time (120). So changed both and haven't had a problem since 8-)

Then on Sunday i decided to give the MR diff drop kit a go ..All good no real issues there although the center bolthole on the pumkin side of the diff did decide that it wanted to start to cross thread :? so whacked a tap in and all good.. again.

Then came the coil overs.....got passenger side in and drivers side removed by dinner and finished off the next day. Not the most fun job on your own but holding your tounge in the right place and engaging your brain seems to work :lol: Now comes the fun bit...sway bar was touching coils at rest, so rang Matty and a set of relocates are on there way 8-) (top work Matt.)In the mean time i chose to remove the sway bar to avoid any rubbing....and my god its like driving a battleship :lol: :lol: much worse if you have the dms shocks wound out :? but even with them in she still floats along :roll:
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

Re: Oggy extract's a digit (finally)

Postby blkrota on Wed, 25 Sep 2013 4:17 +0000

Realy , i like the boat feeling, its not that bad , but i dont have all my weight on the front yet.

Matt is awsome when it comes to after sales service .

Put some pics up :)
User avatar
blkrota
 
Posts: 417
Joined: Sun, 04 Dec 2011 5:32 +0000

Re: Oggy extract's a digit (finally)

Postby oggy on Wed, 25 Sep 2013 5:11 +0000

Image
linished lca's.

Image

Image
Image
DMS progressive coil over's in 8-)

Currently sitting about 60 mm above what it was....but no doubt that had sagged badly. Need to do something with the arse end before the front goes any higher :?
Occupational health and safety officers..Stop messin with Darwin's theory of natural selection... Stupid hippies.



Oggy's build viewtopic.php?f=41&t=19033
User avatar
oggy
Moderator
 
Posts: 3123
Joined: Thu, 24 May 2012 6:47 +0000

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 26 guests