boxhead55 wrote:They all get filth
hiluxruss wrote:x2 on boxheads photo when I done my injectors it was unbeleivabele I dont no how it could even suck the whole thing was fully caked with sludge I replaced the lot as I broke the white plastic ring on the top of the fuel sender
07luxyTD wrote:Took mine out 3 weeks ago, hardest part is dropping and reinstalling the tank itself When removing the white plastic ring retaining the strainer and float if you dont have the tool you can use some 30-35mx 5-8mm flat bar to tap the tabs around being carefull to make sure its hard against the ring so the tabs dont break off. I actually used a fair size file
Once its off i got in there with a banister brush and give it a scrub then rinse with diesel. My strainer was horrid so plungged it in and out some diesel for a while till it was clean.
When putting the ring back on use the same method but clockwise untill the strainer assemble is tight, if not tight will probly get crap and water in the tank
Cheer Ross
Users browsing this forum: No registered users and 6 guests