D_Force wrote:Is this still alive??
The cruise control earth wire on the steering column comes to this plug. I would rather add a pin to the plug here and earth it with the ECU than tap in to the wires on the steering column, to keep the job neater and technically correct.
clutch switch from the local Toyota parts counter (#88280-42010)
Have a link to the cruise stalk on ali?
reallyxxxxxxloud wrote:There is no way it is as simple as adding a stalk. I fit OEM type (stalk is exact) cruise controls for the AP Eagers Group. They are one of the biggest Toyota dealer networks out there. I do about 5 Hilux's a week. If it could be done they would already be doing it. If any one wants info on my cruise PM me please.
olcoolone wrote:The two extra wires are to do with the drive by wire go pedal.
It is to do with the fail safe circuit that checks the excellerator components for any malfunctions.
The cruise control only has two wires, an earth and a signal wire to the ECU.
The cruise control relies on different resistive values to alter the signal from the switch to the ECU.
You also have to enable the ECU to accept the input.
Regards Richard
Users browsing this forum: No registered users and 21 guests