Hi,
I recently had some valve shims replaced and I have some oil leaking from the large rubber hose that connects to the intercooler. You can see in the photos it has sprayed out a little at the top of the hose and it is also dripping at the bottom side of the hose and oil is running along the silver part (sorry don't know what it is) with the blue/white label/barcode and down the pipe towards the front of the engine. I have only done about 400km since the work was done. I have tightened up the hose clamp and I think that should stop the oil leaking.
But my real question is should there be that much oil in there? So the top end would have all been taken off and I have only done approx 400km and there is easily 6-10ml (if not more) of oil that has come out. Is this normal... if not what does this mean!?
Thanks guys