1kd Turbo fluctuations PLEASE HELP!

Turbo, Manifolds, Exhaust, Intercooler, Internals etc

1kd Turbo fluctuations PLEASE HELP!

Postby frostyy on Tue, 25 Apr 2017 9:04 +0000

Hey guys,

Just wondering if anyone could offer any insight into my issue. I have a 2006 hilux (with egr cooler). The car now has 195xxx klms on it. The previous engine died at around 180xxx and I have replaced it with a 2008 model engine but used my existing turbo did all the work with me and a mate. Since installing the engine I have noticed a slight whine coming from the turbo at around 5 psi ( in cab boost gauge) and when this noise can be heard 50% of the time the boost will fluctuate from 5-10 psi it goes up and down about 5 times without me moving my foot on the throttle. It does it when cold or hot high speed or low speed. It seems to be triggered by a sudden increase of boost. The car has no engine codes and no boost leaks from what I can see. We noticed a small leak on the intake manifold a little while back but have now resealed that and is no longer leaking however boost fluctuations are still there. I am aware that these are a variable vein turbo and I know that the computer controls the boost I have replaced my stepper motor on my turbo but issue still remains. I believe something is telling the turbo to go up and down the boost but where it is getting this signal I cannot figure out.

Cheers blokes, frostyy.
frostyy
 
Posts: 4
Joined: Tue, 25 Apr 2017 8:43 +0000
Location: Riverland, South Australia


 

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby TOYZX on Wed, 26 Apr 2017 4:51 +0000

Try cleaning your map sensor filter and get the sensor checked. It might be playing up giving the computer false boost readings.

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby frostyy on Wed, 26 Apr 2017 5:39 +0000

Will be trying that today or tommorow thanks mate will let you know how it goes
frostyy
 
Posts: 4
Joined: Tue, 25 Apr 2017 8:43 +0000
Location: Riverland, South Australia

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby cooganstein on Wed, 26 Apr 2017 7:36 +0000

Did u have boost gauge before engine swap, to know if it was present before. My gauge gives off some fluctuating readings under light and medium throttle but stays steady on WOT. I think there's a similar thread here on this topic
cooganstein
 
Posts: 115
Joined: Mon, 13 Aug 2012 6:07 +0000
Location: Cairns QLD

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby Gipsy on Wed, 26 Apr 2017 9:38 +0000

@ constant throttle the vanes on the turbo do fluctuate to maintain the rev/power balance. Whine could be normal as the turbo increasing boost. Mine whistles around 2 to 4k rpm under acceleration and as you back off the tone changes. Remember the turbo has no waste gate so the vanes are used to compensate to keep the ecu satisfied.
What max boost you seeing?
Cheers Gipsy :D although I'm sure somebody will challenge that :lol: even Einstein wasn't certain of his theories.
My 2013 auto D4D DC SR5, prefilter, 3" exhaust and Chip with egt probe, stock SR5 rims with Toyo Open Country AT2 265/65R/17's
Gipsy
 
Posts: 2185
Joined: Tue, 07 May 2013 2:00 +0000
Location: South Coast NSW and all over Oz

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby frostyy on Wed, 26 Apr 2017 6:02 +0000

Hey guys thanks for the replys. It has been mentioned before that it maybe the boost gauge issue itself but having felt the surgin of power when the boost goes up and down has led me to believe that it isn't that. The turbo noise that I am hearing in my opinion is not a noise that is normal. Is not really a whistle, but a whine similar sound of an alternator with bad bearings (it's not that though haha) also as I said the boost will normally only fluctuate on flat ground at a cruising speed with throttle held in the same position. It won't do it at WOT and if I give it a bit more juice whilst it's doing it it stops doing it. Max psi I'm seeing is around 14-15
frostyy
 
Posts: 4
Joined: Tue, 25 Apr 2017 8:43 +0000
Location: Riverland, South Australia

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby Mikes08lux on Wed, 10 May 2017 2:26 +0000

I have the exact issue after i rebuilt my engine. Did you have any luck figuring it out
Mikes08lux
 
Posts: 1
Joined: Mon, 06 May 2013 9:40 +0000

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby TOYZX on Wed, 10 May 2017 3:28 +0000

Have ya checked the turbo for bent veins?

Sent from my SM-N920I using Tapatalk
User avatar
TOYZX
Moderator
 
Posts: 2919
Joined: Wed, 08 May 2013 7:58 +0000

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby frostyy on Wed, 10 May 2017 6:28 +0000

No luck yet, probably going to rebuild the turbo and inspect. I'll let youse know if it fixes it
frostyy
 
Posts: 4
Joined: Tue, 25 Apr 2017 8:43 +0000
Location: Riverland, South Australia

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby cooganstein on Sat, 12 Aug 2017 12:50 +0000

Hey frosty did u come to any kind of resolution yet?
cooganstein
 
Posts: 115
Joined: Mon, 13 Aug 2012 6:07 +0000
Location: Cairns QLD

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby Dexterdog on Tue, 29 Aug 2017 7:40 +0000

Any luck finding where this noise was coming from? After I did an intake manifold clean and replaced the injectors, my truck is now making the same noise as frostyy has explained. No noise before work was done, so thinking it could be one of the vacuum lines or something left disconnected. Any ideas anyone?
Dexterdog
 
Posts: 2
Joined: Mon, 13 Jun 2016 6:35 +0000
Location: Toukley NSW

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby Dexterdog on Fri, 27 Oct 2017 1:01 +0000

Found the issue with my truck. I had left the 3 nuts that bolts the egr elbow to the intake manifold. Only had them finger tight. Oops...
Tightened them up, and now going great.
Dexterdog
 
Posts: 2
Joined: Mon, 13 Jun 2016 6:35 +0000
Location: Toukley NSW

Re: 1kd Turbo fluctuations PLEASE HELP!

Postby cooganstein on Fri, 27 Oct 2017 9:38 +0000

Thanks for the follow up dexter. Still would like to hear back from frosty hopefully too.
cooganstein
 
Posts: 115
Joined: Mon, 13 Aug 2012 6:07 +0000
Location: Cairns QLD


Return to Engines

Who is online

Users browsing this forum: Mark Simmonds and 12 guests