Hey, my name is Allan. I bought a 2017 Hilux workmate about 1 month ago and have done quite a few mods since.
Ride height is 850mm RTG front and back. Only had the springs installed last week so they may settle 10mm or so in the next few weeks.
Mod summary:
- American Racing ATX Chamber wheels (no center caps) 17x9 +18 offset - stock is +20
- Mickey Thompson 32" (265/70R17) ATZ P3 tyres
- Super Pro 50mm spacer and blocks
- Pedders 7838 coil springs up front (+60mm) increased front from 790 to 850mm RTG.
- Ironman commercial steel bullbar with rated recovery points
- Ironman side steps
- LED headlights and DRLs
- Window tint
Stock as a rock at delivery:
The very next day after installation of Super Pro spacer and wheels:
Side steps installed:
Bullbar Installed:
Pedders springs installed:
Before and after:
Finally, I purchased a provent 200 and attempted to fit it however the 2017 hilux 2.4 engines appear to be different from the '16 models. Can anybody tell me what the metal pipe on the crankcase vent with a return is? The older models simply had a hose that could be easily disconnected and re-routed to the provent. Not so much for the '17 models.